Gsr750 Service Manual Access

  • Transmission:

    • The GSR750 engine requires a valve clearance inspection every 24,000 km. The manual dedicates an entire chapter to this.

    | Component | Spec | Test condition | |-----------|------|----------------| | Battery | 12V 10Ah (YTZ10S) | 13.0–13.2V static, >10.5V cranking | | Alternator | 3-phase, 35A @ 5,000 rpm | 14.0–14.8V at battery terminals | | Stator resistance | 0.2–0.6 Ω between yellow wires | Disconnected from regulator | | Crankshaft position sensor | 180–280 Ω | Peak voltage >1.5V AC | | Fuel pump pressure | 300–320 kPa (43.5–46.4 psi) | With regulator vacuum line connected | | FI codes | C00 = normal, C12 = CPS, C28 = STP sensor | Blink pattern on dash | gsr750 service manual

    The manual is divided into chapters. Here are the sections you will reference most often: Transmission :

    Artículos relacionadosMás del autor