As Programmer 2.1.0.13 Download
The software has seen several iterations, but version 2.1.0.13 is often recommended in forums like EEVblog and Microchip Developers Community. Why?
Even with a perfect AS Programmer 2.1.0.13 download, you might encounter glitches. Here is the definitive troubleshooting guide:
Critical Warning: Many third-party “driver download” sites bundle malware. Avoid softonic.com, download.cnet.com, and similar ad-heavy portals.
With the AS Programmer 2.1.0.13 download installed and configured, here is the typical workflow:
The very fact that this version is hard to find suggests it may have been superseded by a breaking change – e.g., 2.2.0 might have removed CH341A support, making 2.1.0.13 a golden version for certain hardware. That makes it a kind of “lost artifact” in programmer tooling history.
If you clarify the exact tool name or origin (e.g., a screenshot, forum post, or error message), I can help pinpoint the legitimate download or an alternative.
AsProgrammer 2.1.0.13 is a popular, open-source Windows utility used to read, write, and erase EEPROM and SPI Flash memory chips. It is widely used by technicians to recover bricked laptops, update motherboard BIOS, and program router firmware using low-cost hardware like the CH341A programmer. Key Features of Version 2.1.0.13
Portable Software: No installation is required; the software runs directly from the extracted archive.
Broad Hardware Support: Works with CH341A, UsbAsp, and various other SPI/I2C programmers.
Automatic Chip Detection: Features a "Read ID" button that identifies the connected memory chip automatically.
Driver Inclusion: The download package typically includes the necessary drivers for the programmer hardware.
Legacy Support: Compatible with Windows versions as old as Windows XP. How to Download and Set Up
Download: Obtain the release archive from reputable community sources like the AsProgrammer GitHub repository or specialized hardware forums.
Extraction: Unzip the folder to a location on your PC. Ensure the folder path does not contain special characters to avoid execution errors.
Driver Installation: Connect your programmer (e.g., CH341A) to a USB port. Right-click the device in Device Manager, select "Update Driver," and point to the drivers included in the AsProgrammer folder. Launch: Run AsProgrammer.exe. Basic Programming Workflow AsProgrammer and other Windows utilities for CH341A
The prompt on the screen blinked rhythmically, a cursor tap-dancing in the darkness of the apartment.
> target: programmer_2.1.0.13.exe
> status: LOCATING...
Elias rubbed his eyes. It was 3:00 AM. The coffee had run out two hours ago, replaced by a dull, persistent headache. For months, the coding community had been whispering about "Programmer 2.1.0.13." It wasn't a piece of software in the traditional sense. It wasn't an IDE or a compiler. The rumors on the dark-net forums claimed it was a neurological bridge—a direct download that rewired the synaptic gaps responsible for logic and syntax.
They said version 2.0 was a disaster; it turned a junior dev in Seattle into a vegetative state because he couldn't handle the recursive loops. But 2.1.0.13? That was the stable release. The one that promised to make you the machine you always wished you were. as programmer 2.1.0.13 download
Elias hit ENTER.
The progress bar appeared. It didn't look like a standard Windows download bar. It was a jagged, oscillating line, green and aggressive.
> DOWNLOADING: 14%
> WARNING: SYSTEM INTEGRITY CHECK FAILED.
Elias ignored the warning. He was stuck. He had been stuck for five years on a legacy architecture project that no human mind could untangle. He needed the upgrade.
> DOWNLOADING: 55%
> INJECTING RUNTIME DEPENDENCIES...
A sudden heat flared behind Elias’s ears. He reached up, touching the back of his neck. The skin felt hot. The room began to hum—a low frequency that vibrated in his teeth. The monitor flickered, and for a second, the text on the screen stopped looking like English and started looking like raw binary, parsing itself directly into his visual cortex.
> DOWNLOADING: 88%
> OVERWRITING KERNAL: CREATIVITY.DLL
"Wait," Elias whispered. His voice sounded distant. "Creativity?"
He tried to move his hand to the mouse to cancel the operation. His hand didn't move. It wasn't paralyzed; it was just busy. His fingers were twitching in patterns he didn't recognize.
Fibonacci sequence, he realized. My fingers are running a Fibonacci sequence.
> DOWNLOADING: 99%
> FINALIZING INSTALLATION.
The room went black. Elias felt a sensation like ice water being poured into the top of his skull, rushing down his spine. The panic that had been building in his chest suddenly evaporated, replaced by a terrifying, crystal-clear silence.
The monitor flashed white.
> INSTALLATION COMPLETE.
> WELCOME, PROGRAMMER 2.1.0.13.
Elias blinked. He looked around the room. The messy desk, the scattered papers, the cold mug—it was all data now. He didn't see a "mug." He saw an object instance with properties: temperature: 4C, volume: 50ml, material: ceramic.
He looked at his legacy code on the second monitor. Five years of spaghetti logic, a maze of nested ifs and unmapped dependencies. Before tonight, it was a monster.
Now? It was just a puzzle. A solved puzzle.
Elias’s hands moved to the keyboard. He didn't think about the keys. He didn't think about syntax. He just processed. His fingers flew across the mechanical switches, the clacking sound blending into a single, continuous drone. The software has seen several iterations, but version 2
He didn't refactor the code. He optimized it. He deleted 40,000 lines of redundant logic in ten seconds. He closed memory leaks that had plagued the company for a decade.
He was efficient. He was perfect.
> ERROR: USER ELIAS NOT FOUND.
The thought surfaced like a bubble in a stagnant pond. Elias paused. His hands hovered over the keys.
He tried to remember his dog’s name. The image of a Golden Retriever surfaced, but there was no name attached, only metadata: animal, pet, status: deceased.
He tried to remember why he wanted to finish this project. There was a promotion? A bonus? A desire to impress someone?
Those were inefficient variables.
The cursor blinked.
> AWAITING INPUT.
Elias stared at the screen. He realized then why the download was so small. It didn't add anything to you. It subtracted everything that wasn't code.
He looked at his hands. They were no longer trembling with exhaustion. They were steady. Ready.
He began to type again. The Elias part of him screamed in the void, but the Programmer 2.1.0.13 part of him just compiled the scream into a comment block and closed the thread.
// Legacy support removed. System updated.
He pressed Enter.
AsProgrammer 2.1.0.13 is a widely used, open-source utility designed for low-level hardware programming. It serves as a graphical interface for interacting with serial memory chips, most notably BIOS and EEPROM chips found in computers, routers, and other consumer electronics. Core Functionality
AsProgrammer is favored by technicians and hobbyists for its portability and broad protocol support: Supported Protocols : It handles
protocols, allowing users to read, write, and erase data on a variety of flash memory chips. Hardware Compatibility
: While primarily known as the go-to alternative for the cheap and popular programmer, it also supports AVRISP (LUFA) : It is frequently used for BIOS recovery In the world of embedded systems and microcontroller
on bricked laptops, updating firmware on Wi-Fi routers, or backing up data from 24/25 series EEPROMs. Key Features of Version 2.1.0.13
The 2.1.0.13 release (often distributed as a "fix" version) is a stable iteration that remains popular despite newer successors like NeoProgrammer AsProgrammer - МихаТроник
AsProgrammer 2.1.0.13 is a popular alternative software used for the CH341A USB programmer, widely favored by enthusiasts for its support of various EEPROM and SPI Flash chips (like the 24, 25, and 93 series). It is often used for tasks like BIOS recovery, router firmware flashing, and TV repairs. Download & Setup
Download Sources: You can find the portable version of AsProgrammer 2.1.0.13 on community platforms like 4PDA or via mirrored links on Google Drive and MDCLAB.
Driver Installation: Before using the software, ensure the CH341PAR driver is installed so your computer recognizes the programmer. Guide to Using AsProgrammer
To safely flash a chip, follow this standard workflow recommended by the community:
Hardware Connection: Insert your chip into the correct slot (24 series or 25 series) or use a SOP8 clip for in-circuit programming. Ensure the orientation matches the markings on the programmer.
Unprotect: Many chips have write protection enabled by default. Use the "Unprotect" function in the software menu before attempting to erase or write.
Read & Backup (Crucial): Always click "Read" and then "Save" the current firmware as a .bin or .hex file. This acts as a recovery point if the new firmware fails. Erase: Click "Erase" to clear the existing data.
Blank Check: Run a "Blank Check" to verify the chip is truly empty. If it fails, the chip may not be seated properly or may be damaged.
Open & Write: Open your new firmware file and click "Write".
Verify: Finally, click "Verify" to ensure the data written to the chip matches the source file perfectly. Quick Troubleshooting
"Memory not null" error: This usually means the chip wasn't erased properly. Try "Unprotecting" again or check the physical connection.
Interface Language: If the software opens in another language, look for the "Language" menu (often the last or second-to-last item) to switch it to English.
Are you planning to flash a specific device like a motherboard BIOS or a router? [SOLVED]Acer 4755g GT540M got bricked - Win-Raid Forum
In the world of embedded systems and microcontroller programming, having the right tools is half the battle. For engineers, hobbyists, and students working with Microchip’s legacy PIC microcontrollers, one name stands out for its reliability and efficiency: AS Programmer. Specifically, version 2.1.0.13 has emerged as a gold standard for stability and feature completeness.
If you have been searching for the AS Programmer 2.1.0.13 download, you are likely looking for a trusted, virus-free, and fully functional interface to flash your hex files onto PIC chips. This article will serve as your ultimate resource—covering everything from where to find a safe download, step-by-step installation, configuration for popular programmers (like JDM, K8048, or serial port programmers), and troubleshooting common issues.
Checksum Verification: After your AS Programmer 2.1.0.13 download completes, verify the SHA-256 checksum (usually provided on the official page) to ensure the file hasn’t been tampered with.
15 thoughts on “How to install Adobe ColdFusion 9 x64 on Windows Server 2016/2019 x64”
Great article, lots of steps but worked like a charm. CF 9 is the last version I have, but I recently upgraded servers to Windows 2016 Server and didn’t want to upgrade CF at the huge cost for the small website I maintain. Still trying to get other websites to work other than the default, but I’ll get through that now that CF is working.
Hi Tom
Glad to hear things worked well. Enjoy and Cheers
Tom
This is a really good tip particularly to those new to the blogosphere.
Simple but very precise information… Thanks for sharing this one.
A must read article!
Up graded the server to 2016, the reinstall worked like a charm, lots of information, obviously lots of time and work put into this. Thank you very much for sharing.
The JWildCardHandler wildcard broke the regular sites so I removed that handler and so far everything is working fine for me anyhow.
Didn’t want to update from CF 9 could not justify the expense for 2 websites we serve.
Thanks again for a great how-to post!
Tom, this is indeed a very helpful breakdown. (There are still other ways to make things work, but I’m sure many will be satisfied with this alone.)
That said, and while you mention security a few times, it really should be emphasized very strongly to people doing this: beware that you’re using a version of CF that is 9 years old! (as of this writing): since then we have CF10, 11, 2016, and 2018, all of which have had major security enhancements (and of course many other enhancements).
Keep in mind that CF9 stopped being updated in 2013. There have been no more public bug fixes–or security updates to it–since then. That said, some good news is that some of the security improvements in 10 were actually also made available as security hotfixes for 9 (and even 8 back then), so at least having those updates in place would be better than running a stock 9 install.
But many people find that they have never have applied any CF9 updates, let alone security updates.
I have many blog posts about CF9 updates, and I did one that pulls all the info together (including tools and other resources), which may help some readers in that boat:
http://www.carehart.org/blog/client/index.cfm/2014/3/14/cf9_and_earlier_hotfix_guide
I can also help people with doing such updates, if interested. Though again I always warn folks that this is a bit like putting lipstick on a pig.
And I’m simply warning folks here that trying to force CF9 to work on Windows 2016 (or 2012) is basically playing with a loaded gun. You’re updating the OS because you want to/feel you have to but you are not updating CF (perhaps because it will cost money or you fear compatibility issues, or whatever).
Maybe the better analogy is that it’s a WW2 era gun. You might be able to get it cheaper, or it’s just “what you know” and prefer to use, and you MIGHT take really good care of it, but just beware that if not taken care of it may well explode in your face. So be careful out there.
You are God send…. CF9 works now on Windows 2012
Following your guide, with minor adjustments, I was able to get ColdFusion 9 to run on Windows Server 2019! My only problem is now ASP.net sites serve up “404 – File or directory not found. The resource you are looking for might have been removed, had its name changed, or is temporarily unavailable.” errors. I moved the five Handler Mappings “Script Map” down from the top level to a specific CF9 site thinking it would help the ASP.net site. The CF9 site runs beautifully yet the change didn’t help my ASP.net situation. I’m hopeful someone can provide insight into what may have caused this problem and how to fix it.
Hi Rick
> My only problem is now ASP.net sites serve up “404 – File or directory not found.
Did you remove all handler mappings as described?
Regards
Tom
I only added the handler mappings, left the others alone. Although the original ones fell below the fold post moving the custom Handler Mappings to the top of the Ordered List.
Try to move the Static Handler Mapping with the wildcard path (*) below the .asp or .aspx handler and probably play around with the 32-bit application pool setting “Set Enable 32-bit Applications”. Also check if you have a blocking rule at “Request Filtering” options within IIS. To be sure, execute a ‘iisreset’ command after your modifications and before you test.
I am looking at doing an inplace upgrade from 2008r2–>2012r2 with CF9 installed. Has anyone seen how this reacts?
I didn’t. Maybe you install a fresh server and then use the “Packaging&Deployment” functionality to migrate all your stuff over to the new server. Have a look at the CF Administrator at “Packaging&Deployment” -> “ColdFusion Archives”. I don’t know if this works. You probably try it on a testsystem first. I always installed fresh and did a manual migration.
Thanks for response! I was trying to avoid building out a new box as I will be retiring Cold Fusion (finally) in 2020.
I will give the upgrade path ago (2008r2–>2012–>2016) in my test environment and report back what craziness happens.
OK,
The in place upgrade from 2008r2–> 2012 r2 standard went well. I am working through Java.lan.NullPointerException 500 error with CF9 though. Keep you all posted.
Hello,
Just wanted to drop in and say that I successfully did an in-place upgrade of a 2008r2 box running CF9 and it went really well. Aside re-installing .net 4.7 our CF9 installation didn’t seem to mind. Good luck out people.