If you are holding a motherboard with "MS-7616" printed on it, you likely have an MSI Iona-GL8E. This was a very popular motherboard used in mid-range desktop PCs (such as the Medion Akoya P770x series) around 2010-2011.
Here is everything you need to know, from where to download the manual to the board's limitations.
Pin 1: HDD LED (+) | Pin 2: Power LED (+)
Pin 3: HDD LED (-) | Pin 4: Power LED (-)
Pin 5: Ground | Pin 6: Power Switch (+)
Pin 7: Reset SW (+) | Pin 8: Ground
Pin 9: Reserved/NC
No polarity for switches; LEDs require correct +/-.
The MS-7616 is a micro-ATX (µATX) motherboard built on the Intel G41 chipset, supporting Intel’s LGA 775 processor line. It was designed for cost-effective home and office desktops produced between 2009 and 2011.
| Symptom | Most likely fix | |----------------------------------|---------------------------------------------------------------------------------| | No power, fans don’t spin | Check 24-pin + 4-pin power connectors; test PSU with paperclip trick. | | Beep code: continuous long beeps | Memory not detected – reseat RAM, clean gold contacts, test one stick at a time.| | 1 long, 2 short beeps | Graphics error – reseat GPU or switch to integrated video (remove discrete card).| | PC powers off after 2 seconds | CPU overheating or bent socket pin – check heatsink mounting, inspect CPU pins. | | USB keyboard not working in BIOS | Use PS/2 keyboard or enable “Legacy USB Support” in BIOS. | | Boot loop after BIOS change | Clear CMOS via JBAT1 jumper. | | SATA drive not detected | Switch BIOS SATA mode from IDE to AHCI (or vice versa). Also check cable. | User Manual Motherboard Ms-7616...
Before handling the motherboard:
If the exact manual is lost, general guides for MSI OEM LGA775 or Medion motherboard pinouts can cover:
Would you like help identifying the specific chipset or front-panel pinout for your MS-7616 board? If you can describe any text printed near the CPU socket or RAM slots, I can give more precise guidance.
User Manual: Motherboard MS-7616
Table of Contents
1. Introduction
Congratulations on purchasing the MS-7616 motherboard! This user manual is designed to help you install, configure, and troubleshoot your new motherboard. The MS-7616 is a high-performance motherboard designed for desktop computers, featuring a robust design, advanced technology, and excellent expandability.
2. Safety Precautions
Before handling the motherboard, please take the following precautions to prevent damage and ensure your safety:
3. Motherboard Layout
The MS-7616 motherboard layout is designed to provide easy access to its various components. The motherboard features:
4. Hardware Installation
This section guides you through the installation of the motherboard and its components.
Enter BIOS: Press Del repeatedly during POST (or F2 on some OEM systems).
Boot Menu: F12 – select boot device.