Absolutely yes. For a 20-minute investment, you transform an infuriatingly slow 2015-era system into a stable, usable 2019-era system. The Bluetooth reliability alone is worth the risk.
The only people who should not upgrade:
If you follow this guide precisely, your Medianav will feel snappier, more reliable, and finally worthy of your dashboard.
Pro tip after upgrade: Do a factory reset (Settings → System → Factory Reset) after the upgrade is complete. This clears stale cache from the 9.1.3 partition and ensures maximum performance.
Disclaimer: Upgrading your car’s firmware carries inherent risk. The author is not responsible for bricked units. Always verify your firmware file’s source. This guide is for educational purposes based on community reverse-engineering of Renault’s official update process.
Upgrading a MediaNav system from version (often referred to as 10.13.1) is not possible through standard software updates
. These two versions belong to entirely different hardware generations with different operating systems. Hardware Compatibility Conflict MediaNav Evolution (v9.1.3): This system runs on Windows CE 6.0
. Version 9.1.3 is widely considered the final official stable update for this hardware. MediaNav Linux (v1.0.13.1+): The newer generation (version 3) runs on a Linux-based operating system. Direct Upgrade:
Because the operating systems and processors are fundamentally different, you cannot "update" the software from one to the other. Attempting to force a Linux-based firmware onto a Windows CE unit can lead to a permanent (hardware failure). car multimedia software Available Options for 9.1.3 Users
If you are currently on version 9.1.3, you can still improve your system using the following methods: Official Updates: Renault Media Nav Toolbox Dacia Media Nav Toolbox
on your PC to ensure you have the latest available maps and minor patches officially supported for your specific hardware. Third-Party Customware: Options like
allow Windows CE-based MediaNav Evolution (v5.2.7 – 9.1.3) systems to add new functions, such as alternative navigation apps and video players. Hardware Replacement:
To get the features of the newer version (like improved Apple CarPlay or Android Auto performance found in Linux versions), you would typically need to replace the entire head unit with a newer model. car multimedia software How to Safely Check Your Version Turn on your MediaNav device. System Version to see your current firmware. car multimedia software custom software compatible with your 9.1.3 system? MediaNav Evolution Update - car multimedia software
The upgrade from MediaNav version 9.1.3 to 1.0.13.1 is not a standard software update because these versions belong to different hardware generations.
Version 9.1.3 is the final official firmware for the MediaNav Evolution (MN2), which runs on a Windows CE operating system.
Version 1.0.13.1 is firmware for the MediaNav Evolution Late 2018 (MN3), which runs on a Linux operating system and supports Android Auto and Apple CarPlay.
Because of the change from Windows to Linux and a significantly more powerful processor in the newer unit, you cannot simply "update" the software from 9.1.3 to 1.0.1x.x via a USB stick. 🛠️ The "Upgrade" Paths
Since a direct software update is impossible, you have two primary options: 1. Hardware Swap (Recommended for CarPlay/Android Auto)
To get the 1.0.13.1 features, you must replace your current head unit with the newer Linux-based "MN3" unit. upgrade medianav 913 to 10131
Compatibility: The physical dimensions and connectors are generally the same.
Requirements: You will need the radio code for the new unit.
Pros: Native support for smartphone integration (Android Auto/CarPlay) and much faster performance. 2. Custom Firmware (Alternative)
If you want to keep your 9.1.3 hardware but want new features, you can use third-party "customware" like Menaco .
Features: Can add video players, alternative navigation (like 7ways or Navitel), and rear-view camera support.
Note: This will not turn your system into the Linux 1.0.13.1 version, but it expands what your current 9.1.3 unit can do. 🛰️ Standard 9.1.3 Maintenance
If you simply want to ensure your 9.1.3 system is at its absolute peak, follow the official update path for maps and minor system stability: MediaNav Evolution Update - car multimedia software
Once upon a time, in a world of Renault and Dacia owners, there was a quest to cross the great digital divide between two generations of infotainment. The Problem: A Tale of Two Systems
Our protagonist’s car was equipped with MediaNav Evolution (MN2), running on the aging Windows CE 6 operating system. For years, version 9.1.3 was the pinnacle of this system—the highest official peak a WinCE unit could ever reach.
But on the horizon, newer cars began to sport the MediaNav Evolution 2/3 (MN3), a vastly more powerful system built on Linux. This modern beast didn't just have maps; it had the holy grail of drivers: Android Auto and Apple CarPlay. Its firmware versions didn't start with 9; they lived in the 10.x.x.x range, like the elusive 10.13.1. The Quest: The Forbidden Upgrade
Many drivers tried to bridge the gap. They downloaded the 10.13.1 firmware, hoping a simple USB stick would transform their 9.1.3 unit into a smartphone-syncing powerhouse. But there was a dragon at the gate: Hardware Incompatibility.
Version 9.1.3: Lives on a 667 MHz processor with 1 GB of RAM and WinCE.
Version 10.13.1: Lives on a 2 GHz processor with 2 GB of RAM and Linux.
Because the hardware is fundamentally different, you cannot "software update" a 9.1.3 unit to 10.13.1. If you try to force it, the system simply won't recognize the file, or worse, it could become a "brick"—a very expensive paperweight in your dashboard. The Ending: A New Path
Our story ends with a choice. To get the features of version 10.13.1, the protagonist learned they must undergo a Hardware Swap. They would need to:
Source a physical MN3 (Linux) head unit from a newer model or a breaker's yard. Swap the physical units behind the dash.
Only then could they enjoy the 10.13.1 firmware and the modern connectivity they craved.
And so, the 9.1.3 unit remained a faithful companion for its era, while the driver looked forward to a future where their phone and car finally spoke the same language. MediaNav Evolution Update - car multimedia software Absolutely yes
Direct software upgrades from MediaNav version 9.1.3 to 1.0.13.1 are generally not possible because they run on different hardware and operating systems. System Compatibility
The version number indicates the hardware generation of your unit:
MediaNav Evolution (Version 5.x to 9.1.3): These units run on Windows CE 6.0. 9.1.3 is considered the final official stable version for this hardware.
MediaNav Evolution 2 / Late Model (Version 1.0.x): These units (typically 2019+ models) run on Linux and feature more powerful processors to support Android Auto and Apple CarPlay.
Because the architecture has changed from Windows to Linux, you cannot simply "flash" the 1.0.13.1 firmware onto a 9.1.3 device. Options for Your Unit (9.1.3)
Since you cannot jump to the Linux-based 1.0.13.1 software, you have two main paths:
Official Map Updates: You can still update the maps on your 9.1.3 system using the official MediaNav Evolution Toolbox. Insert a FAT32-formatted USB drive (min 4GB) into your car.
Go to Navigation > Options > Map Update > Update to create a "fingerprint" of your system.
Connect the USB to your PC and use the Renault Toolbox or Dacia Toolbox to download available content.
Custom Firmware (Third-Party): Many users install third-party add-ons like Menaco, which supports version 9.1.3. This can unlock features like alternative navigation apps (Navitel, 7ways) and video players without needing a hardware swap.
Hardware Upgrade: To get the features of version 1.0.13.1 (like Android Auto), you would need to replace the physical head unit with the newer LG LAN5800WR0 (Linux-based) model.
Updating MediaNav from 9.1.3 to 1.0.13.1: Hardware vs. Software
Upgrading from version 9.1.3 to version 1.0.13.1 is not a standard software update because these versions belong to two different hardware generations of the MediaNav system.
Version 9.1.3 is the final official firmware for the MediaNav Evolution (v1), which runs on the Windows CE operating system.
Version 1.0.13.1 is firmware for the newer MediaNav Evolution 2 (v2 or MN3), which runs on a Linux-based operating system.
Because the underlying operating systems and hardware (processor and RAM) differ, you cannot simply install version 1.0.13.1 onto a device currently running 9.1.3 via a USB update. The Path to 1.0.13.1: Hardware Replacement
To "upgrade" to version 1.0.13.1, you must physically replace your existing head unit with the newer Linux-based MediaNav Evolution 2 module. Hardware Compatibility: The newer units (often part number LAN5810WR0 Go to product viewer dialog for this item.
) physically fit into the dashboard slots of vehicles that use the older Evolution v1 units. If you follow this guide precisely, your Medianav
Key Benefits: Moving to the 1.0.13.x system provides native support for Apple CarPlay and Android Auto, which are not available on the 9.1.3 version.
Installation Note: Replacement units from third-party sellers or salvaged vehicles may need to be "coded" with your vehicle's VIN and specific configuration (like camera settings) to function correctly. Maintaining Your Current 9.1.3 System
If you choose to stay with your current hardware, version 9.1.3 is already the most advanced official software available for that device. You can still perform regular maintenance through official channels:
⚠️ CRITICAL DISCLAIMER:
This process is not official and carries risks of bricking your unit. Medianav 10131 was not designed for 913 hardware. This guide is for educational/archival purposes only. Proceed at your own risk.
Sometimes, upgrading the maps requires a new activation code (License Key). If the maps appear but are "locked," you may need to generate a license key based on your unit's unique ID. This is common with third-party map updates.
Absolutely.
The good:
The bad:
If you want, I can:
Upgrading your Renault or Dacia MediaNav from version (or 1.0.15.1+) generally involves transitioning from the older MediaNav Evolution
(Linux-based or Windows CE) to the newer hardware/software architecture Key Differences & Requirements Version 9.1.3: This is the final stable official version for the MediaNav Evolution (MN2) hardware based on Windows CE car multimedia software Version 1.0.13.1 / 1.0.15.x: These versions are for the newer MediaNav (MN3)
units, which run on Linux and natively support features like Apple CarPlay Android Auto Renault India Hardware Limitation:
typically upgrade a version 9.1.3 unit to 1.0.13.1 via software alone because they run on different operating systems and hardware car multimedia software
. To get the 1.0.13.1 features, a hardware swap of the head unit is usually required. Official Update Process (To the Latest for your Hardware)
If you simply want to ensure your current 9.x system is at its most recent stable version, follow these steps: Prepare a USB Drive: Use a FAT32-formatted USB stick (minimum 8GB-16GB) Generate Fingerprint: Insert the USB into your car's MediaNav Map Update (this saves your system info to the USB) Use the Toolbox: Download and install the MediaNav Toolbox on your PC
Insert the USB into your PC; the Toolbox will identify your unit and offer any available official software or map updates Install in Vehicle: Return the USB to the car while the engine is running
The system should automatically detect the update and prompt you to install Troubleshooting & Support System Version Check: To verify your exact current version, go to System Version car multimedia software Free Updates:
Official map updates are often free for the first 90 days (or sometimes up to 3 years) after vehicle purchase Renault UK Official Guides: You can find detailed walkthroughs on the official Renault Easy Connect help pages Renault India Are you looking to perform a hardware swap to get CarPlay/Android Auto, or are you trying to resolve a software bug on your current unit? medianav evolution system