Total Station Leica Tcr 1203 Manual
The manual describes three primary routines. Here is the condensed operational flow:
The manual outlines two storage pathways:
Workflow to export:
[MENU] > [Data Transfer] > [Export Job] > Select file type > Select CF card. Total Station Leica Tcr 1203 Manual
Even with careful use, errors occur. The official manual lists these specific codes:
| Error Code | Meaning | Manual Solution | | :--- | :--- | :--- | | Err 104 | Vertical angle index out of step | Power cycle. If persists, send for calibration. | | Err 251 | Memory full | Delete old jobs or transfer to CF card. | | Battery Low (Flashing) | Voltage < 11.5V | Replace immediately. Do not measure distances. | | Laser not visible | RL mode failing | Clean the EDM lens with a microfiber cloth. | The manual describes three primary routines
Critical Warning from the Manual: If the instrument displays "Tilt Error," you have exceeded the compensator range (approx. 4 minutes). Re-level immediately. Ignoring this ruins all horizontal angles.
Before diving into manual navigation, one must understand what the TCR 1203 actually is. Released as part of Leica’s 1200 series, this instrument is a 3-second total station (3" angular accuracy). The "TCR" acronym breaks down as follows: Workflow to export: [MENU] > [Data Transfer] >
The official Leica TCR 1203 manual is technically split into several volumes: the User Manual, the Technical Reference Manual, and the Safety and Introduction Guide. Most users need the Technical Reference Manual for coding, layout, and resection routines.
To activate RL mode: