The Data Packet With Type-0x96- Returned Was Misformatted Access
Ask: Was the system expecting a 0x96 at this moment? If not, maybe the packet is for a different transaction but misrouted.
ETH_P_CUSTOM = 0x96 sock = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, socket.htons(ETH_P_CUSTOM)) sock.bind(('eth0', 0))
The error message in question typically points to a lower-level communication issue between devices. Resolving such errors often requires a systematic approach to identifying and eliminating potential causes, which may involve both hardware and software troubleshooting steps. If the issue persists, consulting with technical support for the specific device or system involved may provide more tailored guidance.
This error message indicates a protocol-level failure in a network communication system. It implies that a device received a specific data packet (identified by the hex code 0x96), but the contents of that packet did not match the expected structure or length, causing the software to reject it. the data packet with type-0x96- returned was misformatted
Here is a technical report and analysis of the issue.
The header of the packet likely defines a specific length, but the actual data size differs.
Describe what was wrong:
Example:
Received length was 5 bytes, but minimum required for type 0x96 is 8 bytes.
This indicates a reception error. A client or server sent a request, and the remote host responded with a packet that failed basic validation checks. The system is saying, "I received something, but it doesn't follow the rules we agreed upon." Ask: Was the system expecting a 0x96 at this moment
Scenario: A weather station uses a custom protocol over UART. The central hub polls sensors every second. Sensor type 0x96 is defined as "wind speed and direction" (16 bytes: 4 bytes speed float, 2 bytes direction integer, 10 bytes reserved).
Error log: "data packet with type-0x96 returned was misformatted"
Diagnosis:
Fix: Hardware re-seating + adding a stronger CRC to the protocol.
Document ID: IR-2024-0x96-01
Status: Draft Technical Report
Classification: Internal / Engineering
