Tenda D810r Firmware Update

Click the "Browse" or "Choose File" button. Navigate to your desktop and select the .bin file you downloaded. Double-check the filename to ensure you have the correct hardware version.

Now that you have the latest firmware, take 5 minutes to optimize your settings. tenda d810r firmware update

Now we get to the main event. Follow these instructions precisely. Click the "Browse" or "Choose File" button

  • Select the File: Click "Browse" or "Choose File" and select the .bin firmware file you extracted earlier.
  • Initiate the update: Click "Upgrade" or "Update."
  • Wait patiently: A progress bar will appear. Do not close the browser, turn off the PC, or unplug the router. The router LEDs will blink erratically—this is normal. The process takes approximately 2 to 3 minutes.
  • Automatic Reboot: The router will reboot automatically. Once the power LED stabilizes (solid green), the update is complete.
  • Hard Reset (Highly Recommended): Even after an upgrade, old configuration variables can linger. Press and hold the Reset button (pin-hole on the back) for 10 seconds to restore factory defaults.
  • Reconfigure: Log back into 192.168.1.1 and re-enter your ISP settings (VPI/VCI, username, password) and Wi-Fi name/password.

    • Do not skip this step! Updating firmware carries a small risk. If the power goes out during the update, you could "brick" your router (make it unusable). Select the File: Click "Browse" or "Choose File"

    You might visit the Tenda website and see that the last firmware for your hardware version was released in 2016. This is common for older ADSL routers. In this case:

    Do not download firmware from third-party "driver download" websites which are often laced with malware.