Technicolor Td5336 Manual

If you want to use a powerful mesh system or a third‑party router (Asus, Netgear, Ubiquiti) but keep the TD5336 as a pure modem, enable bridge mode.

How to (official method missing from most manuals):

In bridge mode, the TD5336’s Wi‑Fi and routing functions are disabled. To reverse, you must factory reset.

The manual clearly states that holding the Reset pinhole for 10 seconds reverts all settings. But what are the defaults?

Warning: If you cannot log in, the manual instructs you to check the sticker on the bottom of the unit. Many ISPs customize the default password to the unit’s serial number. Technicolor Td5336 Manual

Technicolor (formerly Thomson) does not always host end-user manuals directly on their main corporate site due to OEM agreements with ISPs. Here is the strategic approach to finding the correct PDF.

Who is this for?

Who should upgrade?

Recommendation: If the TD5336 came free with your internet plan, keep it. However, put it in Bridge Mode and buy a dedicated Wi-Fi 6 router. This combination gives you the stability of the ISP-certified modem with the speed and coverage of a modern router. Do not buy this device used or unlocked on eBay/Marketplace unless you are certain your ISP allows third-party modem registration, as many providers will not activate a unit they did not provision. If you want to use a powerful mesh

The default Wi‑Fi settings are often conservative. To get the best performance, ignore the manual’s “recommended” settings and do this:

2.4 GHz (for range and legacy devices):

5 GHz (for speed and streaming):

Hidden feature missing from most TD5336 manuals: You can enable “Smart Connect” (band steering) that automatically pushes devices to 5GHz. Find it under Wi‑Fi > Advanced Settings > Band Steering. Enable it, then set “Load balance” to prefer 5GHz. In bridge mode, the TD5336’s Wi‑Fi and routing

Before diving into menus, let’s establish what the TD5336 is. Manufactured by Technicolor (formerly Thomson), the TD5336 is a combined VDSL2/ADSL2+ modem and dual‑band router. It is commonly provided by ISPs (Internet Service Providers) across Europe, Australia, and parts of Asia for fiber‑to‑the‑cabinet (FTTC) or traditional ADSL connections.

Key Hardware Specs (As per the official manual):

Why this matters: The manual often leaves out that the "blue" Ethernet port can be reconfigured as a WAN input if you switch to cable or fiber optic with a separate ONT.