top of page

Tc58nc6623 Sss6698ba Mptool Patched | Must Watch |

Look for a button labeled "Patch DB" or "Debug" .

"I had a fake 128GB USB 3.0 drive (real capacity 16GB). The patched SSS6698-BA tool detected the controller, let me force low-level formatting, and restored true 16GB. But on another drive, it just killed it – no longer recognized."

An MPTool is a low-level software utility provided by controller manufacturers (like Skymedi/Silicon Motion) to flash drive assemblers.

  • Target Audience: Factory technicians, not end users. MPTools are not user-friendly and can permanently brick a drive if misused.

    • Hardware required:

    You cannot fix these drives with DiskPart, EaseUS, or HP USB Format Tool. Here is why:

    Creating a "solid feature" or successful recovery for a TC58NC6623 / SSS6698BA controller using a patched MPTool is notoriously difficult due to the scarcity of compatible binary files (firmware) for this specific Solid State System (SSS) chip. Core Technical Challenge

    The SSS6698BA (often rebranded as Toshiba TC58NC6623) is a legacy USB flash controller. While the 3S USB Mass Production Utility (ver 3.287) is the standard tool used for these chips, it often fails because it lacks the correct .BIN file for the specific NAND flash memory paired with your controller. Steps to Generate a Successful Flash (The "Solid Feature")

    To move beyond a generic error and actually "patch" or configure the tool for a successful repair, follow these steps: Identify the NAND Flash ID:

    Use a tool like ChipGenius or Flash Drive Information Extractor to find the specific "Flash ID" (e.g., AD DE 94 EB 74 44).

    The "Solid Feature" depends entirely on matching this ID to a corresponding entry in the MPTool's configuration files. Verify the Binary (.BIN) Files:

    Navigate to the \ISP_Code\ or \Bina\ folder within your MPTool directory.

    Check if there is a .BIN file that mentions 6698 or BA. If not, the tool will not be able to "patch" the firmware onto the controller. Edit the Configuration (INI) File:

    Open the Settimg.ini (or similarly named .ini file) in a text editor. Ensure the [PenDrivePrepare] section matches your hardware.

    Crucial Patch: If the tool doesn't recognize your chip, you may need to manually add the Flash ID to the FlashList.ini file if you have a compatible ISP binary. Use "Safe Mode" (If Unrecognized):

    If the MPTool does not see the drive at all, you may need to short the I/O pins on the NAND chip (Pins 29-30 or 30-31 usually) while plugging it in to force Mask ROM Mode (Test Mode). Recommended Tools tc58nc6623 sss6698ba mptool patched

    3S USB MPTool v3.287: The most common version for 6698/BA chips, though compatibility is hit-or-miss.

    Flash Drive Information Extractor: Essential for getting the raw hardware strings needed for manual INI patching.

    USBDev.ru SSS Section: This is the primary repository for patched SSS utilities and firmware. Common Recovery Fixes

    If you are encountering a "Write Protected" error during the process, you can attempt these software-level clears before re-flashing:

    DiskPart: Use attributes disk clear readonly in the command prompt to ensure the OS isn't blocking the tool.

    Low-Level Format: Try a generic low-level formatter like the HP USB Disk Storage Format Tool before using the MPTool. SSS [Solid State System] - USBDev.ru

    Resurrecting "Brick" USB Drives: TC58NC6623 / SSS6698BA MPTool Guide When a USB flash drive based on the Toshiba TC58NC6623 Solid State System (SSS) 6698BA

    controller fails, it often becomes "write-protected" or entirely unrecognized by Windows. These controllers, often used in Kingston or Toshiba drives, require specific Mass Production Tools (MPTools) to reflash the firmware and restore functionality. 1. Identifying Your Controller

    Before searching for software, you must confirm your drive uses the (often marked as TC58NC6623 in Toshiba-branded units). Use a hardware ID tool like ChipGenius Flash Drive Information Extractor to verify: Controller: TC58NC6623 Often matches 0x98DE8493 0x98DE9892 2. Finding the Right "Patched" MPTool

    The standard SSS MPTools often lack support for newer NAND memory chips or specific hardware configurations. "Patched" versions are modified by the enthusiast community to bypass version checks or include updated (In-System Programming) files necessary for the reflash. SSS6698_USB_Flash_Sorting_Tool SSS_MPTool_v2.xxx Repositories like FlashBoot.ru are primary hubs for these utilities. 3. The Reflashing Process Preparation: Connect your drive to a USB 2.0 port on the back of your PC for stable power. Configuration:

    Run the MPTool as Administrator. If the drive is not detected, you may need to use a "test mode" by shorting specific pins on the controller chip. ISP Selection: Select the correct

    file that matches your NAND Flash ID. Using the wrong file can permanently brick the hardware.

    Click "Start" and wait for the process to complete. A green indicator usually signifies a successful restoration of the factory settings. 4. Troubleshooting Common Errors Write Protection:

    If the tool fails to remove write protection, ensure you are using a "Sorting Tool" version, which is more aggressive in remapping bad sectors. Device Not Recognized: Device Manager Look for a button labeled "Patch DB" or "Debug"

    for "Unknown USB Device (Device Descriptor Request Failed)." This often indicates a hardware failure or the need for a different USB port. Using an MPTool will erase all data

    on the drive. If you need data recovery, do not attempt to reflash the firmware. for your Flash ID? SSS6698 - PC-3000 flash

    Table_content: header: | Flash device type | Controller marking | Number of memory chips | Number of parts | Memory chip marking | www.pc-3000flash.com

    USB Ports Not Working on Windows: Solve Common USB Issues | Dell US

    Reviving "Dead" USB Drives: A Guide to the TC58NC6623 / SSS6698-BA MPTool

    If you’ve encountered a USB flash drive that is suddenly "Write Protected," showing "No Media" in Disk Management, or refusing to format, you are likely dealing with a firmware corruption issue. For drives utilizing the Toshiba TC58NC6623 (also known as the SSS6698-BA) controller, the standard Windows formatting tools won't help.

    To fix these drives, you need a Mass Production Tool (MPTool). Specifically, the SSS6698-BA MPTool Patched version is the gold standard for enthusiasts and technicians looking to flash the firmware and restore functionality. Understanding the Hardware: TC58NC6623 & SSS6698-BA

    The TC58NC6623 is a controller chip manufactured by Solid State System (SSS) but often rebranded or utilized heavily by Toshiba in their TransMemory U202 and U301 series. In the technical community, this controller is functionally identical to the SSS6698-BA.

    When the firmware on these chips becomes unstable, the hardware enters a "safety mode," preventing any data writing to protect the NAND flash. A "patched" MPTool is often required because the original factory versions sometimes lack the configuration files for newer NAND types or have restrictions that prevent them from running on non-factory machines. Prerequisites Before You Start

    Before downloading any software, confirm your drive's controller using a hardware identification tool like ChipGenius or Flash Drive Information Extractor. You are looking for: Controller: SSS6698-BA / TC58NC6623 Flash ID: (e.g., Toshiba, SanDisk, or Hynix NAND strings)

    Warning: Using the wrong MPTool can permanently "brick" your USB drive. Ensure the Controller and Flash ID match the tool's database. How to Use the SSS6698-BA MPTool (Patched) 1. Configuration Setup

    Once you have downloaded the patched MPTool (typically found on specialized Russian or Chinese firmware archives like FlashBoot.ru), you will notice several .ini files in the folder. These are configuration profiles.

    Find the .ini file that most closely matches your NAND flash (e.g., 6698_Toshiba_43nm_D2.ini). Open the main executable (usually SSS_MPTool.exe). 2. Selecting the Binary

    If the tool does not automatically recognize your drive, you may need to manually point the software to the correct ISP (In-System Programming) firmware file. In the "Settings" or "Config" section of the MPTool, ensure the ISP Version matches the controller version. 3. The Flashing Process "I had a fake 128GB USB 3

    Insert the USB drive. It should appear in one of the numbered slots in the MPTool interface.

    Select the Start button. The tool will begin erasing the bad blocks, scanning the NAND, and rewriting the firmware.

    Wait for the Green Light. If the process finishes with a "Pass" or a green highlight, your drive has been successfully reformatted at the controller level. Why Use a "Patched" Version?

    The "patched" versions of the SSS6698-BA MPTool often include:

    Unlocked ISP Files: Standard tools might lack the specific firmware binaries needed for retail Toshiba drives.

    Bypassed Errors: Patched versions often ignore "ID Mismatch" errors that occur when a controller is used with a slightly different NAND revision than the factory default.

    Extended Capacity Support: Better handling of high-capacity modules that the original 2013-era software couldn't recognize. Troubleshooting Common Errors

    Error 28 (ISP Not Found): You are likely using an MPTool version that doesn't include the binary for your specific NAND. Look for a "Firmware" subfolder and ensure the .bin files are present.

    Error 7 (Drive Not Recognized): Try using a USB 2.0 port. These low-level flashing tools often struggle with the drivers for USB 3.0/3.1 controllers.

    Write Protect Still On: If the MPTool fails to clear the write protection, the NAND chip itself may be physically exhausted (worn out), meaning the drive is beyond software repair. Conclusion

    The TC58NC6623 / SSS6698-BA MPTool Patched is a powerful utility that can save a USB drive from the trash bin. While the interface looks dated and the process is technical, it is the only way to bypass "Write Protected" errors that software-level formatters simply cannot touch.

    Do you have the Flash ID from ChipGenius so I can help you find the specific .ini configuration for your drive?

    What happens during the process:

    Success: The port turns Green and shows "Pass" with the correct capacity. Failure: The port turns Red. If you see "Bad Block over setting" or "Check ISP Fail," you need to repeat Phase 3 and select "Low Level Format."

    bottom of page