Sinotimer - Svp-916 Manual Pdf

The MANUAL button toggles the operational state of the switch. This is critical to activate the timer.

Pressing the **MANUAL

The Sinotimer SVP-916 is a single-phase, self-resetting intelligent protector designed to safeguard electrical equipment from over-voltage, under-voltage, and over-current conditions. It is commonly used in residential distribution lines and household box entries. Technical Specifications

According to the SVP-916 Instruction Manual and Sinotimer manufacturer data, the device operates under the following parameters: Rated Voltage: 230V AC, 50/60Hz. Rated Current Options: 40A, 63A, or 80A (model dependent). Power Consumption: ≤ 2W. Mechanical Life: ≥ 4,000 operations. Installation: 35mm standard DIN rail mount.

Dual LED Display: The upper display shows real-time Voltage (V) and the lower display shows real-time Current (A). Parameter Settings Guide

To enter the setting mode, press and hold the "SET" button for 3 seconds. Use the ▲ (Up) and ▼ (Down) keys to adjust values. Press "SET" repeatedly to cycle through the menu until "END" appears, then press "SET" one last time to save. Adjustment Range Default Value Over-voltage Protection P01 221V–300V–OFF Over-voltage Recovery P02 220V–299V Over-voltage Action Time P03 0.1s–10s Under-voltage Protection P04 150V–219V–OFF Under-voltage Recovery P05 151V–220V Under-voltage Action Time P06 0.1s–10s (Suggest ≤ 0.3s) Over-current Protection P07 1A–40A/63A/80A Max (Model dependent) Over-current Action Time P08 0.1s–512s Fault Recovery Delay P09 Power-on Delay Time P10 Reset Mode (AU/HA) P11 Auto (AU) / Manual (HA) Sinotimer Svp-916 Manual Pdf

Note: If under-voltage action time (P06) is set longer than 0.3s, the internal relay may not function correctly during a total power failure. Indicator Status Meanings

The LED indicators provide immediate visual feedback on the state of your power line: Voltage Indicator: Always On: Normal voltage. Fast Flashing: Over-voltage condition detected. Slow Flashing: Under-voltage condition detected. Current Indicator: Always On: Normal current load. Flashing: Over-current condition detected. Advanced Functions

Fault Inquiry: Navigate to P12 to view the last 5 fault codes. UH: Over-voltage fault. UL: Under-voltage fault. IH: Over-current fault.

Factory Reset: Simultaneously press and hold ▲ and ▼ for 3 seconds. The lower LED will turn off for 1 second to confirm the reset.

Here’s how you can find the official PDF: The MANUAL button toggles the operational state of

What the Sinotimer SVP-916 manual usually covers (based on similar programmable timers):

If you tell me what you’re trying to do with the SVP-916 (e.g., set a schedule, wire it, reset it), I can give you the step-by-step instructions without needing the PDF.

Finding the official manual for the Sinotimer SVP-916 can be difficult because the manufacturer (Sinotimer) often relies on third-party retailers to host the files, and their website interface is not always user-friendly.

Here is a breakdown of how to find the PDF, along with a "Quick Start' guide based on the standard programming for this specific timer model, in case you cannot locate the file. If you already own the device but lost

If you finally get your hands on the Sinotimer SVP-916 Manual PDF, look for these advanced sections:

The Sinotimer SVP-916 is a programmable digital time switch designed for industrial, commercial, or residential applications. It allows users to set up to 16 ON/OFF programs per week, with a minimum switching interval of 1 minute.

Key features:

The Sinotimer SVP-916 is a programmable digital timer commonly used for automating lighting, appliances, HVAC zones, and other AC loads. It’s a DIN-rail or panel-mount time switch (model variations exist) that typically supports multiple on/off programs, daily/weekly scheduling, manual override, and sometimes holiday or holiday-block functions.