To update the software (firmware) on your Satlink WS-6933 Go to product viewer dialog for this item.
, you will need to use a PC to transfer the update file via USB. This process typically resets the device, meaning you will need to re-upload your satellite and transponder (TP) lists afterward. Prerequisites
USB Cable: A standard cable to connect the meter to your computer.
Drivers: Ensure you have the Satlink USB drivers installed so your PC recognizes the device in the Device Manager under "Ports (COM & LPT)".
Software Tools: You will need the Flash Loader program for firmware updates and SAT Editor if you also plan to update TP lists.
Firmware File: A compatible .bin update file (e.g., version 10.2 or later). Step-by-Step Update Process
Enter Download Mode: Turn off the device. While holding the Return button, flip the power switch to ON. The screen should remain black, but the power light will stay lit. Connect to PC: Plug the
into your computer via USB and verify which COM Port it is assigned to in your computer's Device Manager. Run Flash Loader:
Open the Flash Loader software and select the correct COM Port. Choose the "Download to Device" option.
Browse for your firmware file (ensure the file extension is .bin). satlink ws-6933 software update
Execute Update: Click "Next" to begin. Wait for the progress bar to reach 100%. Do not disconnect the cable during this time.
Finalize: Once complete, turn the device off and back on. You can verify the new version in the System Setup menu.
Watch these step-by-step video guides to see how to install the drivers, enter download mode, and use the Flash Loader software correctly: How to Update Satlink 6933 TP List and Software (2025) 7K views · 7 months ago YouTube · TassTech
Updating your Satlink WS-6933 Digital Satellite Finder Go to product viewer dialog for this item.
is essential for maintaining an accurate transponder list and ensuring the device supports the latest satellite parameters. The process is typically handled via a PC connection using the unit's USB port. Preparation Before starting, ensure you have the following:
USB Cable: A standard mini-USB or micro-USB cable (depending on your specific hardware revision) to connect the meter to your computer.
Software Files: Download the latest firmware (.bin or .ssu files) and the update tool from the official manufacturer site or a trusted distributor.
Power: Ensure the device is fully charged or connected to a power source to prevent it from shutting down during the update. Update Procedure
Backup Current Data: It is highly recommended to use the update tool to back up your current firmware and transponder (TP) list before applying changes. To update the software (firmware) on your Satlink
Connect to PC: Power on the Satlink WS-6933 and connect it to your computer. The PC should recognize the device; if not, you may need to install specific COM port drivers.
Run the Update Tool: Open the software update utility on your PC. Select the appropriate COM port and load the new firmware file you downloaded.
Initiate Upgrade: Follow the on-screen prompts in the software to begin the transfer. Do not disconnect the cable or turn off the device until the progress bar reaches 100% and the software indicates a successful update.
Restart & Verify: Once finished, disconnect the device and restart it. Navigate to the System Setup menu to verify the new software version is active. Updating the TP (Transponder) List
If you only need to update the satellite frequencies rather than the entire firmware:
Use the "Transponder Setup" or "Satellite Setup" menu options to manually edit entries.
Alternatively, many update tools allow you to import a pre-configured .xml or .txt satellite list to batch-update all available satellites.
For further troubleshooting, consult the Satlink WS-6933 User Manual.
WS-6933 User Manual Guide | PDF | Satellite Television - Scribd enter download mode
The Satlink WS-6933 satellite finder can be updated via its USB port to add new satellite frequencies, fix bugs, or improve signal detection performance Update Process To update the software on your device, follow these steps: Prepare the Files : Download the latest
firmware file. Official firmware is often provided by manufacturers or specialized forums, such as SatLink Wiki (AliExpress) or technical support sections on Manuals.plus Connect to PC
: Use the provided USB cable to connect the meter to a computer Run Update Utility
: Open the manufacturer-provided software update package on your PC and select the firmware file
: Follow the on-screen prompts to transfer the file. Once finished, disconnect the cable and restart the unit. You can verify the version under the Key Hardware & Maintenance Tips Battery Care : The device uses a 7.4V/800mAh Li-ion battery
. To maintain its lifespan, avoid complete discharges and charge it fully before the first use Signal Alerts : The WS-6933 includes a Sound and Light Alarm
that triggers when a signal is locked, helping you align dishes without constantly watching the screen Calculations : It can automatically calculate Azimuth (AZ) Elevation (EL) angles for easier satellite targeting
: Use a soft, dry cloth for cleaning; avoid liquid cleaners that might enter the casing and cause damage Communica South Africa compatible USB driver for your operating system? Satlink WS-6933 DVB-S2 Satellite Finder Meter User Manual
Warning: Avoid random “update download” websites that ask for credit card info or require suspicious exe files. The WS-6933 update is a simple .bin or .abs file.
After scanning your favorite satellites, back up the userdb.bin file to your SD card (Menu → USB/SD Backup). This saves hours of rescanning.