Sagemcom Wifi Hub C2 Manual Best «iPhone»
By following this manual, you transform the Sagemcom WiFi Hub C2 from a basic ISP box into a streamlined, optimized networking hub for your home.
The Sagemcom F@st 3890, rebranded as the Com Hem WiFi Hub C2, is a high-speed, dual-band router optimized for fiber and coaxial networks. This device features a 4x4 antenna configuration, typically managed via a web interface to configure WiFi settings or restore factory defaults. For comprehensive setup and troubleshooting instructions, visit Tele2.
Sagemcom WiFi Hub C2 ) is a high-performance cable gateway designed for fiber-coaxial networks, often distributed by providers like Tele2 (Com Hem) . It supports dual-band 802.11ac Wave 2
wireless technology with 4x4 antenna configurations for both 2.4GHz and 5GHz bands. Quick Setup Guide To get your hub up and running, follow these primary steps: Hardware Connection : Connect the coaxial cable from your wall outlet to the port on the back of the hub before plugging in the power. : Plug in the 12V 3A power adapter and press the
button. The "Internet" light (globe icon) will flash green and eventually turn solid white when the connection is active. WiFi Connection : Find your default SSID (WiFi name) WPA password on the sticker located on the bottom of the device. Accessing the Admin Page To change your password or manage network settings: Connect a device to the hub via WiFi or an Ethernet cable
Open a web browser and enter the router's default IP address (found on the bottom label). Log in using the factory admin credentials printed on the label. Navigate to the configuration panel to update your WiFi name and password Technical Specifications Max Download Up to 4000 Mbit/s Max Upload Up to 1200 Mbit/s WiFi Standards 802.11a/b/g/n/ac Wave 2 with bandsteering 4 x LAN RJ45 (10/100/1000 Mbps), 1 x Coaxial Dimensions 234 x 190 x 69 mm Official Manuals & Resources
For full documentation, including safety warnings and detailed certificates, you can download PDFs from the Official Sagemcom Support Site or view community-hosted guides like the Sagemcom WiFi Router User Manual
Are you having trouble connecting specifically or looking to set up advanced features like a guest network or VPN? F@st 3890 Com Hem Wi-Fi Hub C2 | Cable Gateways
Sagemcom Wi-Fi Hub C2: The Ultimate Setup and Performance Guide
The Sagemcom Wi-Fi Hub C2 (commonly identified by model number F@st 3890V3) is a high-performance cable gateway used by major providers like Tele2 and Com Hem. It is designed to handle heavy data traffic, making it a "best" choice for households that prioritize smooth 4K streaming, low-latency gaming, and reliable remote work.
This manual-style guide covers everything from initial physical setup to advanced optimizations to ensure you get the best performance out of your hardware. 1. Physical Setup and Connections
For the fastest registration on the network, always connect your coaxial cables before plugging in the power.
Coaxial Connection: Connect one end of a coaxial cable to your wall plug and the other to the CABLE port on the back of the hub. Tighten it manually—do not use tools.
Wired Devices: Connect your computer or gaming console to any of the yellow Gigabit Ethernet ports using an RJ45 cable for the most stable connection.
Power On: Plug the provided 12V power adapter into the POWER port and press the ON/OFF button. sagemcom wifi hub c2 manual best
Initialization: Wait roughly 3 minutes for the device to boot. The hub is ready for use once the INTERNET LED turns solid white. 2. Accessing the Admin Dashboard
To customize your network or improve security, you must access the web-based interface.
Open a Browser: While connected to the hub's Wi-Fi, go to the default IP address (typically 192.168.1.1 or 192.168.0.1).
Login Credentials: Enter the default Username and Password found on the barcode sticker located on the bottom or back of your modem.
Find Specific Info: If the defaults don't work, refer to the official Sagemcom support site for model-specific documentation. 3. Best Practices for Wi-Fi Optimization
To achieve the best speeds, follow these configuration tips within the admin panel:
Enable Dual Bands: Ensure both the 2.4 GHz and 5 GHz networks are enabled. Use the 5 GHz band for high-speed tasks (gaming/streaming) and the 2.4 GHz band for older devices or long-distance range.
Change Default SSIDs: Rename your Wi-Fi networks and set a strong, custom password in the "Wireless" or "Wi-Fi" settings tab to prevent unauthorized access.
Positioning: Place your hub in a clear, elevated space, away from direct sunlight and metal objects. If signal lights (1–4 bars) are low, move the modem closer to a window or central location. Change your Wi-Fi password on a Sagemcom 5G Modem
0;faa;0;2c5; 0;908;0;f0; 0;88;0;98; 0;279;0;1bd; 0;1240;0;afc;
18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_10;56;
18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_20;56; 0;55d;0;33c;
The Sagemcom WiFi Hub C2 (also identified as the F@st 3890 Com Hem) is a high-speed cable gateway. Below are the key setup and management details typically found in its user manual. 0;92;0;a1; 0;baf;0;15b; Getting Started & Setup 0;f63;0;ace;
Physical Connection: Connect a coaxial cable from your wall plug to the CABLE connector on the back of the hub 0;824;. Tighten it manually without using tools to avoid damage 0;a43;. By following this manual, you transform the Sagemcom
Power On: Plug the provided 12V power adapter into the hub and a wall socket. Press the power button and wait approximately 3 minutes for the device to boot 0;a7a;.
Status Lights: A solid white light on the front typically indicates the hub is online and ready 0;42;.
18;write_to_target_document7;default0;118;0;118;0;16f;0;16f;18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_20;fe0; WiFi Configuration 0;35f;0;b1e;
Default Credentials: You can find your default SSID (WiFi name) and WPA2 password on the label located on the underside or back of the gateway 18;write_to_target_document7;default0;16f;18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_20;a7a;.
WPS Pairing: To connect devices via WPS, press the WPS button on the hub until the front LED flashes amber. You then have a 2-minute window to connect your device 0;42;.
18;write_to_target_document7;default0;fea;18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_20;fd6; Management & Advanced Settings
To customize your network, access the web-based management page: 0;ee;0;b78;
Admin Access: Open a web browser on a connected device and enter the default IP address (often 192.168.1.1 or 192.168.40.1, depending on your service provider) 0;a6e;.
Login: Use the default username admin and the unique password printed on the router's label 0;9db;.
Features: Through the dashboard, you can change the WiFi password, manage connected devices, set up port forwarding, or update firmware 0;42;.
18;write_to_target_document7;default0;124a;0;124a;0;fea;18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_20;f1b; Troubleshooting & Reset
Restart: If you experience connectivity issues, turn the hub off for 30 seconds and then back on.
Factory Reset0;6c2;: To return the hub to its original settings, use a paperclip to press and hold the Reset button (found in a small hole on the back) for approximately 15 seconds until the lights flash 0;42;. 0;145;0;6ac;
For the complete official documentation, you can visit the Sagemcom Support Portal0;8af; or check your provider's specific guide, such as those provided by Tele2 0;17;. Method 2 – Software :
18;write_to_target_document7;default0;76f;18;write_to_target_document1b;_gUXuafyYNbLG4-EPpqne6AY_100;57; 0;f5;0;193;
18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_20;f21;
18;write_to_target_document7;default18;write_to_target_document1a;_gUXuafyYNbLG4-EPpqne6AY_20;51c7;0;4bab;
18;write_to_target_document7;default0;a1;0;a1;18;write_to_target_document1b;_gUXuafyYNbLG4-EPpqne6AY_100;a49;0;5d3; 0;11c5;0;264d; TalkTalk Wi-Fi Hub (Sagemcom FAST 5364)
The Sagemcom WiFi Hub C2 (often labeled as the F@st 3890 Com Hem) is a high-performance cable gateway. Official manuals and detailed configuration guides can be accessed through the Sagemcom Support Portal or provider-specific help pages like Tele2 Support. Quick Setup Guide
Hardware Connection: Connect the coaxial cable to the wall plug and the "CABLE" connector on the router. Plug in the power adapter (12VDC, 2500mA).
Wireless Connection: Locate the default SSID (WiFi name) and WPA password on the sticker at the bottom of the device.
Admin Login: Open a web browser and enter the default IP address, typically 192.168.0.1. Use the default credentials (usually admin for the username and the password found on the bottom sticker). Essential Settings & Management Kundservice - Manual för bredband | Tele2 Företag
| Port/LED | Description | |----------|-------------| | Power | DC 12V input | | Power button | Turns hub on/off | | DSL (RJ11) | For phone line (VDSL2/ADSL2+) | | WAN (yellow) | For fibre/cable modem (Ethernet) | | LAN 1-2 (yellow) | Connect PC, TV, game console | | Phone 1-2 (green) | VoIP telephone | | USB 2.0 | For storage or printer sharing | | Reset pinhole | Factory reset (hold 10+ sec) |
Method 1 – Pinhole:
Method 2 – Software:
After reset, you must use the sticker defaults to reconnect.
Here is the "cheat sheet" you won't find in the official sagemcom wifi hub c2 manual best practices section.