Reset Epson L380-l382-l383-l385-l485-l386 Adjustment Program May 2026
| Item | Details |
|------|---------|
| Software | Epson Adjustment Program (version for L380–L386 series) – e.g., AdjProg_v1.0.0_EPSON_L380_385_485_386.exe |
| Connection | USB cable (direct connection to PC, no network/hub) |
| OS | Windows 7/8/10/11 (32/64-bit) |
| Driver | Official Epson printer driver installed & printer recognized |
The specific version of the adjustment program you need covers a family of EcoTank printers that share the same internal mechanics and printhead. The keyword covers the following models:
Note: While the program works for all listed models, ensure you download the version specifically labeled for the "L380 series" or "L380-L386."
To reset the waste ink pad counter on your Epson L380 , L485, or L386 printer, you can use the Epson Adjustment Program (often called a "Resetter"). This process clears the "service required" error that occurs when the printer's internal ink pads are detected as full. Pre-Reset Checklist
Hardware Setup: Connect your printer directly to your computer using a USB cable; wireless connections often fail during this process.
Power: Ensure the printer is turned on and in an error state (typically with red lights blinking).
Software Prep: You may need to temporarily disable antivirus or Windows Defender, as these programs often flag resetters as false positives. Resetting Guide Reset Epson L380-l382-l383-l385-l485-l386 Adjustment Program
To reset the Epson L380, L382, L383, L385, L386, and L485 Adjustment Program
(also known as a "Resetter"), you must address the "Service Required" error caused by a full waste ink pad counter. Preparation Disable Antivirus
: Before downloading or extracting the program, disable your antivirus and Windows Defender , as these tools are often falsely flagged as threats. Connect Printer : Ensure your printer is connected to your computer via a
(Wi-Fi resets are generally not supported for this process). Run as Administrator : Right-click the AdjProg.exe file and select Run as administrator Resetting the Waste Ink Pad Counter
Epson Adjustment Program (also known as the Resetter) is a service utility used to clear "Service Required" errors and reset the waste ink pad counters for the L380, L382, L383, L385, L386, and L485
series. This process is typically necessary when your printer stops working and displays red blinking lights because its internal absorption pads are theoretically full. PrinterFix How to Use the Adjustment Program Follow these steps to perform a counter reset: Preparation | Item | Details | |------|---------| | Software
: Connect your printer via a short USB cable and ensure the print queue is empty. Launch Utility : Open the AdjProg.exe
file. Some versions may require you to disable your antivirus or set your PC date to August 1, 2017 , to activate the license key. : Click the button to choose your specific printer model and port. Particular Adjustment Mode and select Waste ink pad counter from the list. Initialization Check the box for Main pad counter to read the current percentage. Initialize to reset the counter to zero.
: Turn the printer off and then back on when prompted to finalize the reset. Available Tools & Resources Epson L380: supported functions by WIC Reset Utility
The Epson Adjustment Program (also known as the Epson Resetter) is a utility used to resolve the common "Service Required" error. This error occurs when the printer's internal waste ink pad counter reaches its limit, causing the printer to stop functioning and usually display alternating flashing red lights. Key Functions
Waste Ink Pad Counter Reset: Restores the counter to 0% to resume printing.
Print Head Cleaning: Offers deep cleaning levels (weak, middle, strong) to fix blurry or poor print quality. Note: While the program works for all listed
EEPROM Maintenance: Allows reading/writing of serial numbers and printhead identifiers. How to Use the Adjustment Program How to: Use EPSON Adjustment Program
| Step | Action | |------|--------| | 1 | In the menu, select “Waste ink pad counter” | | 2 | Click “OK” to read current counter values | | 3 | Check boxes: “Main pad counter” and “Ink absorber counter” | | 4 | Click “Initialization” (or “Reset”) | | 5 | Confirm warning dialog – click “Yes” |
| Error | Fix | |-------|-----| | “Communication error” | Reinstall USB driver, try USB 2.0 port | | Program freezes on “Check” | Run as Win7 compatibility mode | | “Timeout” error | Turn printer off/on before reset attempt | | Counters reset but error remains | Reset both Main + Borderless pads |
Before you click "Reset," understand the trade-offs.
| Error | Likely Cause | Solution | | :--- | :--- | :--- | | "Communication error" | Using Wi-Fi or bad USB cable | Switch to a known-good USB cable. Disable wireless on the printer. | | "Model not supported" | Wrong version of tool | You need a newer adjustment program (v2.0.0 or higher for L385/L386). | | Program crashes on launch | Windows 10/11 security | Right-click > Properties > Compatibility > Run as Windows 7. | | Counter resets but error returns after 1 page | Physical pad is saturated; sensor shorted | Replace the physical waste ink pads physically. | | "Reset" button is greyed out | Printer not in service error mode | Force error by running 2-3 deep cleaning cycles until the printer locks. |
Search for "Epson L380 Adjustment Program" or "Epson L385 Resetter." Do not download from random pop-up sites. Look for reputable printer forums or service centers. File size is typically 450KB–800KB. Be wary of viruses—scan the file with antivirus software.
