Pioneer Avh X3600bhs Wiring Harness Diagram Today

The unit has two rear USB inputs (often extended via cables to a glove box). These are standard Type A female to proprietary Pioneer connector. Do not cut these; they are data lines. Replacement cables are available online.


Your Metra adapter has a yellow wire (constant) and a red wire (ignition). You connect them to Pioneer yellow and red. The GM adapter’s orange/white (dash dimmer) connects to Pioneer orange/white. This is why the universal color code works.


This is the smaller connector usually located next to the main harness. Pioneer Avh X3600bhs Wiring Harness Diagram

| Wire Color | Pin Location | Function | Notes | | :--- | :--- | :--- | :--- | | Violet/White | Pin 1 | Reverse Gear Signal | Connect to reverse light. Enables rear camera trigger. | | Black | Pin 2 | Subwoofer (-) Pre-out | For active subwoofer (Non-amplified). | | Violet | Pin 3 | Subwoofer (+) Pre-out | | | Green/Purple | Pin 4 | Steering Wheel Control (SWC) Ground | | | Brown | Pin 5 | Steering Wheel Control (SWC) Input | Aftermarket adapter (Metra/Axxess) connects here. | | Pink | Pin 6 | Microphone (+) | For the included external mic. | | Black | Pin 7 | Microphone (-) | | | White | Pin 8 | Aux Video Input (Yellow RCA) | For backup camera or external video source. | | Red | Pin 9 | Aux Audio Right (Red RCA) | | | White | Pin 10 | Aux Audio Left (White RCA) | | | Yellow | Pin 11 | Parking Brake Detection | Must ground to bypass (illegal) or connect to parking brake switch (legal). | | Green | Pin 12 | System Remote Control Input | For wired remote controllers (rare). | | Blue/Black | Pin 13 | Backup Camera Detection | Usually jumpered with reverse signal. | | Light Green | Pin 14 | Speed Sense (VSS) | For navigation accuracy. Not used on base model. |

Critical Note: The Yellow/Black and Yellow/Red wires you may see in online forums do NOT exist on the AVH-X3600BHS. Those belong to the AVH-X3500BHS. Do not alter your harness looking for them. The unit has two rear USB inputs (often


Do not cut the car’s factory plug. Never. Instead, follow these steps:

Always connect the Black wire to a clean, paint-free metal surface inside the dash. If you use a factory ground wire, verify it has continuity to the chassis. Bad ground = random reboots and alternator whine. Your Metra adapter has a yellow wire (constant)

The AVH-X3600BHS uses two primary connectors from the back of the unit:

Critical Note: This unit requires a smart bypass (e.g., MicroBypass or AX-TB912) to watch video while driving. Simply grounding the parking brake wire will not work due to Pioneer’s two-step logic.


If you are installing a camera:

When you shift into reverse, the 12V from the reverse light will trigger the Pioneer to switch to camera mode instantly.