The Pegatron IPMSB-H61 is a Micro ATX (uATX) motherboard built on the Intel H61 Express chipset. Designed primarily for OEM desktop systems, it supports 2nd and 3rd Generation Intel Core processors (Sandy Bridge and Ivy Bridge). 1. Key Technical Specifications
The following technical details are sourced from the IPMSB Layout Guide and official product sheets: Socket: Intel LGA 1155 Chipset: Intel H61 Express (Cougar Point)
CPU Support: Intel Core i7, i5, i3, Pentium, and Celeron (TDP up to 95W) Memory: 2 x 240-pin DDR3 DIMM slots Supports Dual-Channel DDR3 1066/1333 MHz
Maximum Capacity: 8GB (some variants may support up to 16GB) Expansion Slots: 1 x PCI Express 2.0 x16 (for graphics cards) 1 x PCI Express 2.0 x1 2 x Legacy PCI slots Storage: 4 x SATA II (3.0 Gb/s) connectors Audio: Realtek ALC662 6-channel HD Audio LAN: Realtek RTL8111E Gigabit Ethernet (10/100/1000 Mbps) 2. Rear Panel I/O Ports
The motherboard provides a standard array of connectivity for office and home use: 1 x PS/2 Mouse port (Green) 1 x PS/2 Keyboard port (Purple) 1 x VGA (D-Sub) port 1 x DVI port 4 x USB 2.0 ports 1 x RJ-45 LAN port 3 x Audio jacks (Line-In, Front Out, Mic-In) 3. Internal Headers and Pinouts
Connecting the front panel and internal components requires following these standard pinout locations:
Front Panel Header: Located near the SATA ports; includes pins for Power SW, Reset SW, HDD LED, and Power LED.
USB Headers: 3 x internal USB 2.0 headers (supporting up to 6 additional ports). Power Connectors: 1 x 24-pin ATX Main Power connector 1 x 4-pin ATX 12V CPU Power connector Fan Headers: 1 x 4-pin CPU Fan and 1 x 3-pin System Fan. 4. BIOS and Setup Guide
Entry Key: Press the key repeatedly during the initial POST screen to enter the AMI BIOS setup. Clearing CMOS: To reset BIOS settings to factory defaults: Turn off the PC and unplug the power cord. Locate the CLEAR CMOS jumper (near the battery).
Move the jumper cap from pins 1-2 (default) to pins 2-3 for 5–10 seconds. Return the jumper to pins 1-2 and restart.
Flash Override: For BIOS updates, the "FLASH_OVERRIDE" jumper must often be moved to pins 1-2 to allow writing to the firmware. 5. Component Compatibility & Drivers
While Pegatron does not provide a direct consumer support site, drivers are generally available via the chipset and component manufacturers: IPMSB H61 Motherboard Layout Guide | PDF | Usb - Scribd
The manual for the Pegatron IPMSB-H61 motherboard is a rare find because Pegatron primarily produced this board as an OEM (Original Equipment Manufacturer) component for pre-built PCs from brands like
Because it wasn't sold as a standalone retail product, a single, official "Pegatron" manual often doesn't exist in the traditional sense. Instead, the "story" of this manual is found through the documentation of the specific PC models it powered. Finding the Documentation
To get the technical details usually found in a manual, you should look for the documentation of the systems that used this board: HP Support (Most Common): This board was widely used in the HP Pavilion p7 series HP Compaq 6200 Pro
. Searching for these models on HP’s support site will provide the "Motherboard Specifications" page, which acts as a functional manual. The "Holly" Codename:
In the HP ecosystem, the IPMSB-H61 is often referred to by its internal codename,
. Searching for "HP Holly Motherboard Specifications" will yield the pinout diagrams and RAM compatibility charts you need. Key Technical Specs (The "Manual" Content) pegatron ipmsb-h61 manual
If you are looking for the manual to solve a technical issue, here are the vital stats: Intel H61 Express. LGA 1155 (Supports 2nd Gen "Sandy Bridge" Core i3/i5/i7). 2x DDR3 DIMM slots (up to 16GB total, typically 1333MHz). Expansion: 1x PCIe x16 (Gen 2.0), 3x PCIe x1. Front Panel Header:
Usually follows a standard 9-pin layout, but always verify with the HP/Lenovo diagram for the specific chassis. Tips for Installation BIOS Updates:
Since this is an OEM board, BIOS updates must come from the PC manufacturer (HP or Lenovo), not Pegatron. Installing a "generic" H61 BIOS will likely brick the board. Power Connector:
It uses a standard 24-pin ATX and 4-pin CPU power connector, making it compatible with most modern power supplies if you are moving it to a new case. CPU compatibility list for this board?
The Pegatron IPMSB-H61 is a Micro-ATX motherboard designed for Intel's 2nd Generation Core processors. Built on the Intel H61 Express chipset, it serves as a budget-friendly foundation for desktop systems, prioritizing essential connectivity and stability over high-end features. Core Specifications
Processor Support: Utilizes the LGA 1155 socket, supporting Intel Core i3, i5, i7 (Sandy Bridge), as well as Pentium and Celeron processors.
Memory: Includes 2 DDR3 DIMM slots supporting up to 8GB or 16GB of dual-channel memory (depending on specific revision) at speeds of 1066/1333 MHz.
Expansion Slots: Features 1 x PCI Express x16 slot for dedicated graphics, along with 1 x PCIe x1 and up to 2 legacy PCI slots. Storage: Typically provides 4 x SATA 3Gb/s (SATA II) ports. Manual & Technical Guidance
The manual for this board is often found as a Layout Guide or Quick Reference due to its common use in OEM systems like those from HP or specialized retailers. Key sections covered in technical documentation include:
The Pegatron IPMSB-H61 is a micro-ATX motherboard built around the Intel H61 chipset, primarily used in OEM builds (like those from HP or Dell) during the early 2010s. Finding a detailed manual is difficult as Pegatron typically provides documentation directly to manufacturers rather than end-users. Manual & Technical Overview
Official manuals are mostly available as third-party PDF uploads. The IPMSB Motherboard Layout Guide provides essential setup details:
Motherboard Layout: A diagram showing the placement of CPU socket, RAM slots, and internal headers.
Rear I/O: Descriptions for USB ports, HDMI/DVI, and LAN ports.
Function Selectors: Explanations for jumpers like the FLASH_OVERRIDE, which must be moved to pins 1-2 for BIOS updates and back to 2-3 for normal operation. Core Specifications Motherboard specification Pegatron IPMSB/H61
Average cost, USD ($): 20. Popularity: 0.0/10. Check compatibility. General. Manufacturer. Manufacturer. X. Pegatron. Form factor. findhard.ru IPMSB H61 Motherboard Layout Guide | PDF | Usb - Scribd
The Pegatron IPMSB-H61 is a Micro-ATX (mATX) motherboard built on the Intel H61 Express chipset. Designed for the LGA 1155 socket, it primarily supports 2nd Generation (Sandy Bridge) and 3rd Generation (Ivy Bridge) Intel processors.
The following guide serves as a technical manual for users looking to configure, upgrade, or troubleshoot this specific board. 1. Hardware Specifications Summary Description CPU Socket Intel Socket 1155 (supports Sandy Bridge and Ivy Bridge) Chipset Intel H61 Express (Cougar Point) Memory 2x DDR3 DIMM slots; Dual Channel; Max 8GB RAM Speeds 1066 MHz / 1333 MHz (PC3-10600) Expansion Slots 1x PCIe x16, 1x PCIe x1, 2x PCI Storage 4x SATA 3.0 Gb/s (SATA II) ports Audio Realtek ALC662 or ALC888S (6-channel HD Audio) LAN Realtek RTL8111EL Gigabit Ethernet 2. Internal Connectors and Header Pinouts The Pegatron IPMSB-H61 is a Micro ATX (uATX)
Connecting the front panel cables is the most critical part of installation. The IPMSB-H61 layout guide identifies several key headers:
Front Panel Header (F_PANEL): Typically located at the bottom-right corner. It includes pins for the Power Switch, Reset Switch, HDD LED, and Power LED.
USB Headers: Supports up to 6 additional USB 2.0 ports through internal headers (F_USB1, F_USB2, etc.).
Audio Header (F_AUDIO): For front-panel headphone and microphone jacks.
Fan Connectors: Includes 1x 4-pin CPU_FAN and 1x SYS_FAN connector.
Legacy Ports: Internal headers for Serial (COM) and Parallel (LPT) ports. 3. Memory Configuration The motherboard features two 240-pin DDR3 DIMM slots. IPMSB H61 Motherboard Layout Guide | PDF | Usb - Scribd
I couldn’t find an official manual specifically named "Pegatron IPMSB-H61" in my database, but here’s what you can do:
Specs summary for IPMSB-H61 (common version):
Alternative: If you need jumper settings, front panel pinout, or BIOS beep codes, search for "Pegatron IPMSB-H61 jumper" or "front panel pinout" – those are often shared across H61 OEM boards.
Pegatron IPMSB-H61 Manual: A Comprehensive Guide for Motherboard Enthusiasts
The Pegatron IPMSB-H61 is a popular motherboard model that has been widely used in various computer systems. As with any electronic component, having a comprehensive manual for the IPMSB-H61 is essential for troubleshooting, upgrading, and optimizing system performance. In this article, we will provide an in-depth guide to the Pegatron IPMSB-H61 manual, covering its features, specifications, and usage.
Introduction to Pegatron IPMSB-H61
The Pegatron IPMSB-H61 is a micro-ATX motherboard based on the Intel H61 chipset, designed for use with 2nd and 3rd generation Intel Core processors. Released in 2011, the IPMSB-H61 supports a range of features, including USB 2.0, SATA 3Gb/s, and HDMI/ VGA/ DVI display outputs. This motherboard is suitable for various applications, including home computers, office workstations, and entry-level gaming systems.
Pegatron IPMSB-H61 Manual: What to Expect
The Pegatron IPMSB-H61 manual is a comprehensive guide that covers all aspects of the motherboard, including:
Key Features of Pegatron IPMSB-H61
The Pegatron IPMSB-H61 motherboard boasts several key features that make it a reliable and efficient choice for computer systems: Specs summary for IPMSB-H61 (common version):
Using the Pegatron IPMSB-H61 Manual
To get the most out of the Pegatron IPMSB-H61 manual, follow these steps:
Tips and Tricks
Here are some tips and tricks to help you get the most out of your Pegatron IPMSB-H61 motherboard:
Conclusion
The Pegatron IPMSB-H61 manual is a valuable resource for anyone working with this motherboard. By following the guidelines and instructions outlined in this article, you can ensure proper installation, configuration, and troubleshooting of your IPMSB-H61 motherboard. Whether you're a seasoned computer enthusiast or a newcomer to the world of motherboards, this comprehensive guide will help you get the most out of your Pegatron IPMSB-H61.
Frequently Asked Questions
Q: Where can I download the Pegatron IPMSB-H61 manual? A: You can download the manual from the Pegatron website or other reliable sources.
Q: What is the maximum memory capacity supported by the IPMSB-H61? A: The IPMSB-H61 supports up to 16GB of DDR3 memory.
Q: Can I use a 3rd generation Intel Core processor with the IPMSB-H61? A: Yes, the IPMSB-H61 supports 2nd and 3rd generation Intel Core processors.
Q: What is the chipset used on the IPMSB-H61 motherboard? A: The IPMSB-H61 uses the Intel H61 chipset.
I could not locate an official manual specifically named “Pegatron IPMSB-H61” in Pegatron’s public support archives or standard motherboard documentation repositories.
However, based on available technical data and the common layout of Pegatron H61 motherboards (often used in OEM systems like HP, Asus, or Acer desktops), I have prepared a reference text that can serve as a functional guide for this board.
If you need the actual manufacturer PDF, you would typically search for the system brand (e.g., HP Compaq 6200/8200 Elite) rather than the Pegatron part number.
If you have landed on this page, you are likely holding a motherboard pulled from an HP or Compaq pre-built desktop—specifically, the Pegatron IPMSB-H61. This board is a staple in budget builds, office PCs, and second-hand computer markets. However, finding an official, clear, and comprehensive manual for this OEM board can be frustrating.
This article serves as your complete Pegatron IPMSB-H61 manual. We will cover every detail from technical specifications, front panel header pinouts, BIOS configuration, jumper settings, common errors, and where to download official documentation.
Because Pegatron does not host consumer-facing support, you must get the manual from HP’s support website for the specific computer model the motherboard was pulled from.