| Item | Information | |------|--------------| | Model | Nokia TA-1304 | | Chipset | Unisoc (Spreadtrum) SC9832E | | Android Version | Android 10 (Go Edition) | | PAC File Version | TA-1304_SW_v1.480_Fixed | | File Size | ~1.2 GB (compressed) |
Device: Nokia TA-1304 (also known as Nokia C2 Tava / C2 Tennen / C3, depending on region)
File Type: PAC Firmware File
Status: Fully Fixed – No Auth Errors, No User Data Lock
A properly fixed TA-1304 PAC can reliably restore a Nokia 2.3 to stock and fix many software faults—but ensure the file matches the exact variant and follow cautious flashing steps.
If you want, I can: provide a checklist for verifying a PAC file, list exact SP Flash Tool settings for TA-1304, or search for a verified stock PAC—tell me which.
To flash the Nokia 105 (TA-1304) using a PAC file, you need to use the SPD Upgrade Tool (also known as UpgradeDownload). This process is typically used to fix software hangs, logo loops, or to remove security codes. Prerequisites
Flash File: A compatible .pac firmware file for the TA-1304.
Flash Tool: Download the SPD Upgrade Tool (UpgradeDownload).
Drivers: Install the appropriate SPD (Spreadtrum) USB Drivers so your PC recognizes the device in boot mode.
Battery: Ensure the phone battery is charged to at least 60%. Step-by-Step Flashing Guide
Prepare the Tool: Extract the SPD Upgrade Tool and run UpgradeDownload.exe as an administrator.
Load the PAC File: Click the Load Packet (gear icon) button and select the .pac flash file you downloaded for your Nokia TA-1304.
Start the Process: Click the Start Downloading (play icon) button. The tool will now wait for the device to be connected. Boot into Flashing Mode: Turn off the phone completely.
Press and hold the Boot Key (usually the * (star) key or the center OK button for this model).
While holding the key, connect the phone to your PC via a USB data cable.
Monitor Flashing: Once the tool detects the phone, the flashing process will start automatically. You will see a progress bar. nokia ta1304 flash file pac file fixed
Completion: Wait for the "Passed" or "Finish" message in green. Once finished, click the Stop button in the tool, disconnect the USB cable, and reinsert the battery. Troubleshooting Tips
Security Code: If you are only trying to reset a forgotten code, the default Nokia security code is 12345.
Connection Issues: If the PC doesn't detect the phone, try a different USB port or cable, and verify that the SPD drivers are correctly installed in the Windows Device Manager.
Formatting/Reset: If you can access the menu, you can also perform a factory reset by dialing *#7370#.
Nokia 105 (TA-1304) is a Spreadtrum-powered feature phone that often requires flashing to fix issues like hanging on the logo, white screen, or being "dead" after a failed update. Using a PAC flash file
is the standard method for restoring this device to factory settings. Essential Downloads To begin, you will need the following files: Flash File Nokia 105 TA-1304 PAC File (Google Drive) Flash Tool SPD Upgrade Tool
(also known as Research Download Tool) for Spreadtrum/Unisoc devices. USB Drivers Spreadtrum (SPD) Drivers
are installed so your PC recognizes the device in "U2S Diag" or "VCOM" mode. Flashing Procedure (Step-by-Step) Driver Installation
: Install the SPD drivers on your PC. If you skip this, the tool will not detect your phone. Tool Setup : Extract the SPD Upgrade Tool and run the application ( UpgradeDownload.exe Load Firmware : Click the Load Packet button (gear icon) and select the flash file you downloaded. Device Connection Power off the Nokia TA-1304.
Hold the "Boot Key" (usually the center OK button or the '*' key for feature phones). Connect the phone to the PC via USB while holding the key. Start Flashing : Once the device is detected in Device Manager, click the Start Downloading button (play icon) in the tool. Completion
: The process typically takes a few minutes. Wait for the "Passed" message in green. Critical Precautions
: Flashing will completely wipe all personal information, including contacts and messages. : Ensure the battery is charged to at least
to prevent the phone from powering off mid-flash, which can permanently "brick" the device. Security Backup : If the phone still powers on, try to back up the NV (security) data before flashing to avoid losing the IMEI number. error code in the SPD tool? Nokia 105 Ta 1304 Flash File !FREE! Download -NEW
📱 Nokia 105 Ta 1304 Flash File ! FREE! Download -NEW- - Google Drive. Nokia 105 Ta 1304 Flash File !FREE! Download -NEW | Item | Information | |------|--------------| | Model
📱 Nokia 105 Ta 1304 Flash File ! FREE! Download -NEW- - Google Drive.
Nokia G20 (TA-1336) Hang on Logo Fix | 100% Working Solution
You're looking for a guide on how to fix a Nokia TA-1304 flash file or PAC file. Here's some general information and a step-by-step guide to help you:
What is a PAC file? A PAC file is a type of firmware file used by Nokia phones. It's a compressed archive that contains the phone's firmware, including the operating system, applications, and configuration data.
What is a TA-1304? The Nokia TA-1304 is a specific model of Nokia phone. If you're experiencing issues with your TA-1304, such as software problems or failed flash attempts, you may need to reflash the device with a compatible PAC file.
Before you start:
Tools needed:
Step-by-Step Guide:
Method 1: Using Nokia Flash Tool
Method 2: Using SP Flash Tool (alternative method)
Troubleshooting tips:
Disclaimer: This guide is for educational purposes only. Be cautious when flashing your phone, as it may void your warranty or cause data loss. Always backup your data and use compatible tools and files to avoid any damage.
Nokia TA-1304 Firmware Guide: Flashing Fixed PAC Files The Nokia TA-1304 (part of the Nokia 110 4G series) often requires flashing to resolve software-related issues such as being stuck on the logo, constant restarting, or total power failure (dead boot). Because this device uses a Spreadtrum (SPD) chipset, the firmware is typically distributed as a .PAC file. 1. Essential Tools & Files
To successfully flash the device, you must gather these components on a Windows PC: Tools needed:
Flash File: The specific Nokia TA-1304 stock firmware in .PAC format. Flash Tool: The SPD Upgrade Tool or SPD Research Tool.
USB Drivers: Spreadtrum (SPD) USB Drivers to ensure the PC recognizes the phone in download mode. 2. Preparation
Backup: Flashing will wipe all personal data. Ensure you have a backup if possible.
Battery: Maintain at least 60% battery charge to prevent the device from powering off during the critical flashing process. 3. Flashing Process Follow these steps to restore your Nokia TA-1304: Install Drivers: Run the SPD driver setup on your PC.
Launch Tool: Open the SPD Upgrade Tool (ResearchDownload.exe).
Load PAC File: Click the gear icon (Load Packet) and browse to select the TA-1304 .PAC firmware file. Connect Device: Turn off the phone completely.
Hold the "Boot Key" (usually the Center/OK button for feature phones) while connecting it to the PC via USB.
Start Flashing: Once the tool detects the phone, click the "Play" or "Start" button.
Completion: A "Passed" message will appear when finished. Disconnect the phone and restart it. 4. Troubleshooting Common Issues
Hang on Logo: If the device still hangs on the logo after flashing, try a hard reset using the code *#7370# or *#7780# if you can reach the dialer.
Failed to Detect: If the PC doesn't see the phone, check your USB cable or reinstall the SPD drivers from a reliable source like the Spreadtrum Drivers Page .
For official support or detailed user manuals, you can visit the HMD Global Support page.
Once the successful flash is complete: