The physical layout is the most referenced part of any manual. Here is a text-based diagram based on the original MS-7613 Ver 1.1 documentation.
Top edge (near CPU):
Bottom edge (left to right):
PCIe area:
JPWR1 – Clear CMOS jumper (3-pin). Default is pins 1-2. Move to 2-3 for 10 seconds to reset BIOS.
Without the manual, users frequently mistake JFP1 pin 1 for ground. The correct pinout (from MSI):
Row 1 (top): 1: HD_LED+, 2: Power LED+, 3: HD_LED-, 4: Power LED-
Row 2 (bottom): 1: PWR_SW, 2: Reset SW, 3: PWR_SW_GND, 4: NC
The MS-7613 (ver 1.1), codenamed "Iona-GL8E" and manufactured by MSI for HP, is a micro-ATX motherboard supporting LGA 1156 socket Intel processors and the H57 Express chipset. Key features include four DDR3 DIMM slots for up to 16GB of RAM, one PCIe x16 slot, and onboard Realtek audio, generally designed for Windows 7-era, legacy systems. Detailed specifications and, and motherboard layout information can be found in the Scribd document
MS-7613 (Iona-GL8E) Motherboard Specifications | PDF - Scribd
The MS-7613 Ver 1.1 motherboard, often referred to by its HP/Compaq codename "Iona-GL8E," is a versatile micro-ATX board that served as a staple in various HP Pavilion and Compaq Presario desktop series. If you are looking to revitalize an older system or perform a case swap, understanding its technical manual specifications is essential. Quick Technical Summary Socket: LGA 1156 (Socket H). Chipset: Intel H57 Express. Memory: 4 slots, DDR3 (up to 16GB total). Form Factor: Micro-ATX (24.4 cm x 24.4 cm). CPU & Performance Capabilities
The MS-7613 was designed for the transition era of Intel's first-generation Core processors. According to the Motherboard Specifications from The Retro Web, it supports the following: Intel Core i7-8xx (Lynnfield core). Intel Core i5-7xx/6xx (Lynnfield/Clarkdale core). Intel Core i3-5xx (Clarkdale core).
Critical Note: The motherboard typically supports a maximum processor core frequency of 2.93 GHz. Users on the HP Support Community have occasionally reported issues when upgrading to high-end i7-870 chips, often requiring a BIOS clear (CMOS reset) to stabilize. Memory (RAM) Guidelines
While the board features four DIMM slots, it is strictly limited by its era's architecture: ms-7613 ver 1.1 motherboard manual
Speed: Supports PC3-10600 (DDR3-1333) and PC3-8500 (DDR3-1066). Capacity: 16GB total maximum.
Module Limit: You must use 4GB modules per slot to reach the 16GB limit; larger 8GB modules are generally not compatible. Expansion and Connectivity
If you're upgrading the graphics or adding modern features, the manual specifies: PCI Express x16: One slot for dedicated graphics cards.
PCI Express x1: Three slots for network, sound, or TV-tuner cards. SATA: Four SATA connectors for hard drives and SSDs.
Legacy Ports: Includes an IEEE 1394 (Firewire) port and a DVI/VGA combination for integrated video. Front Panel & Maintenance Tips
Connecting this board to a new case can be tricky because the headers are often proprietary to HP cases.
Front Panel Header: Look for the 9-pin header marked "F-panel" on the board's silk-screen.
Clearing CMOS: If you encounter boot issues after a hardware change, use the JBAT-1 jumper to reset the BIOS settings to factory defaults.
BIOS & Modern OS: While the board can run Windows 10, the chipset predates it significantly. Official BIOS updates from HP Support are increasingly rare and are often tied to specific Windows versions (like Windows 7).
For a visual breakdown of the pinouts and detailed device mapping, the MS-7613 Diagram on Scribd provides the original block diagrams and connector locations.
Are you planning to upgrade the CPU or are you performing a case swap for this motherboard? AI responses may include mistakes. Learn more Motherboard Specifications, MS-7613 (Iona-GL8E) The physical layout is the most referenced part
Comprehensive Guide to the MS-7613 Ver 1.1 Motherboard If you are maintaining or upgrading an older HP desktop, you have likely encountered the MS-7613 Ver: 1.1 motherboard, also known by its HP internal name,
. Manufactured by MSI for HP, this micro-ATX board is a staple of the LGA 1156 era. This guide serves as a practical manual for specifications, upgrades, and connectors. Core Specifications Built on the Intel H57 Express
chipset, this board was designed for the first generation of Intel Core processors. Socket Type: Form Factor: Micro-ATX (24.4 cm x 24.4 cm). Intel H57. Expansion Slots: 1 x PCI Express x16 (for discrete graphics cards). 3 x PCI Express x1. 1 x PCI Express Mini Card. CPU and RAM Upgrade Support
While it is a legacy board, you can still maximize its performance with specific components.
FOR H57 MS-7613 Fully Integrated Main Board 1156 Pins 1st Generation Main Board
FOR H57 MS-7613 Fully Integrated Main Board 1156 Pins 1st Generation Main Board Motherboard Specifications, MS-7613 (Iona-GL8E)
Maximizing Your Legacy Build: The MS-7613 (Iona-GL8E) Motherboard Guide
If you've cracked open an older HP or Compaq desktop lately, you likely found the MS-7613 (Ver 1.1) staring back at you. Known by its HP codename "Iona-GL8E," this Micro-ATX board was a staple of the early 2010s. MicroDream
Finding a formal manual can be tricky since it's an OEM board produced by MSI for HP. This guide consolidates everything you need for repairs or upgrades. The Retro Web 1. Key Specifications at a Glance This board uses the Intel H57 Express chipset and the
socket, making it compatible with first-generation Intel Core processors. Memory4Less.com Form Factor: Micro-ATX (24.4 cm x 24.4 cm). 4 slots supporting up to of DDR3 (1066/1333 MHz). Expansion: 1x PCIe x16 (Gen 2.0), 3x PCIe x1, and 1x PCIe Mini-Card. 4 SATA 3.0 Gb/s connectors. MicroDream 2. CPU Support: Know the Limits
While it supports i3, i5, and i7 chips, there is a crucial limitation: the motherboard generally supports a maximum processor core frequency of Sysnapse Malaysia MS-7613 (Iona-GL8E) CPU upgrade problem Bottom edge (left to right):
Motherboard supports the following processor upgrades: * Intel Core i7-8xx (Lynnfield core) * Intel Core i5-7xx (Lynnfield core) * HP Support Community MSI MS-7613 VER: 1.0 (HP OEM) - The Retro Web
The MS-7613 (Ver 1.1), also known as the HP/Compaq "Iona" motherboard, is an OEM board manufactured by MSI for HP desktop PCs like the Pavilion p6000 series. Because it is an OEM product, HP does not provide a traditional "retail-style" manual, but you can find comprehensive technical specifications and pinout guides from HP Support and The Retro Web. Core Specifications
Socket: LGA 1156 (Supports Intel Core i3, i5, and i7 first-generation processors). Chipset: Intel H57 Express. Form Factor: Micro-ATX (24.4 cm x 24.4 cm).
Memory: 4x DDR3 DIMM slots, supporting up to 16 GB of non-ECC unbuffered RAM (PC3-10600 or PC3-8500). Pinouts & Connectors
If you are moving this board to a new case, these are the critical internal headers: ms 7613 ver 1.1 motherboard manual - HP Support Community
ms 7613 ver 1.1 motherboard manual - HP Support Community - 8882842. Need Windows 11 help? Check documents on compatibility, FAQs, HP Support Community Motherboard Specifications, MS-7613 (Iona-GL8E)
The MS-7613 (also known as the MSI Iona-GL8) is a motherboard primarily found in HP Pavilion desktop computers (such as the HP Pavilion p6xxx series).
Because it is an OEM (Original Equipment Manufacturer) board, MSI does not host the manual on their public site; it is buried in HP’s business archives. Based on the official technical documentation and board layout, here is the "interesting content" regarding this specific board—specifically focusing on its quirks, limitations, and hidden features.
If you are transplanting this board into a different case or repairing a front panel connection, the pinouts are critical.
This motherboard is distinct because it bridges the gap between the older Core 2 Duo era and the modern Core i-series era, utilizing the first-generation Intel "Lynnfield" and "Clarkdale" processors.
Given that MSI no longer produces G41 boards, the MS-7613 Ver 1.1 will become increasingly rare. To keep it functional:
The original manual includes a full capacitor replacement guide (page 38) – something no modern motherboard includes.
Solution from manual (p. 14): The G41 chipset supports a maximum of 4 GB per rank, but only certain double-sided DIMMs. Install RAM in DIMM1 (black slot) first. Use only 2Rx8 modules, not 1Rx4.
