Motorola Gm950 Plus Programming Software Top May 2026

Connect your cable to the radio's accessory port (usually on the back). Turn the radio on. You should hear a click from the speaker—this indicates the radio is ready.

Navigating the world of Motorola software can be tricky regarding licensing. Motorola historically sold their CPS to dealers and authorized service centers.

However, the GM950 Plus is a legacy radio. It is considered "End of Life" (EOL) by Motorola. While official support channels have moved on, the software (often version 06.xx or earlier) is widely available in the amateur radio community and through various repositories of legacy software. motorola gm950 plus programming software top

When searching for the software, you are looking for Professional Radio CPS. It is a Windows-based application.

Compatibility:

No amount of "top" software will work without the correct programming cable. The GM950 Plus uses Motorola’s proprietary 16-pin accessory connector on the rear. You have two main cable options:

Once you have the cable, you will also need a stable power supply (12V DC, 5A minimum) for the radio while programming. Connect your cable to the radio's accessory port

Find the "Signaling" or "Tones" column.

So, you have the cable, the software installed, and the radio on your desk. Here is the workflow to get you on the air. No amount of "top" software will work without

No software alone programs a GM950 Plus. You need a Motorola RIB (or a RIB-less programming cable with built-in level shifting) and a DB9 serial-to-radio cable. USB-to-serial adapters are notoriously unreliable with this radio; a native serial port is the “top” choice.