The software was designed for the Windows 95/98/XP era.
This is where most people fail. You cannot use a standard USB programming cable.
The GM160 uses a RIB (Radio Interface Box). You have two paths: motorola gm160 programming software
Pro tip: If you buy a RIB-less cable, look for one with the Prolific PL-2303 chipset. The newer FTDI chips often have driver issues with this old 16-bit software.
Here is the golden rule: RSS hates Windows 10/11. The software was designed for the Windows 95/98/XP era
This software was written for DOS (yes, MS-DOS) or Windows 95/98. It uses real-mode memory access.
If the hassle of DOSBox and RIB cables is too much, consider these alternatives: Pro tip: If you buy a RIB-less cable,
| Software Name | Version | Notes | |---------------|---------|-------| | Motorola Commercial Series CPS | R05.16 or higher | Also known as "Pro Series" or "GM3xx/GM1xx CPS" | | Older DOS-based RSS | N/A | Not recommended; modern PCs cannot run it easily |
⚠️ Important: You cannot use software meant for the GM300, GM350, or professional series radios (like M1225). The GM160 requires its own Commercial Series CPS.