Infineon Memtool Download — Link

Infineon has recently unified access to development tools under the Infineon Developer Community and MyInfineon portal. Follow these steps exactly to get the latest version (as of 2025).

Memtool is a Windows-based GUI application designed for serial and debugging interface programming. Unlike full-scale IDEs like Dave™ or ModusToolbox™, Memtool focuses exclusively on memory operations:

It supports communication via:

Once logged in, use the search bar to look for "Memtool V6" (or later). Alternatively, use this direct path:

Direct shortcut:
Use Infineon’s Download Center – search “Memtool XMC” – link:
https://www.infineon.com/cms/en/product/search.html?term=memtool

To summarize:

Remember: The best download link is not a static URL—it is your authenticated access to Infineon’s software portal. As of today, the most recent version (Memtool V6.0.2) remains available exclusively through that official channel.

If you encounter a broken link on Infineon’s site, post a query in the Infineon Developer Community forum. An Infineon application engineer will typically respond within 24 hours with a direct temporary link.

Happy flashing, and may your bootstrap loader always sync.

This article was last updated in May 2026. For the absolute latest download instructions, always refer first to Infineon’s official documentation and support channels.

Infineon MemTool is a free software utility used for erasing, programming, and verifying flash memory on Infineon microcontrollers, such as the AURIX™, TriCore™, and XMC™ families. Direct Download & Official Resources

To ensure you have the most secure and up-to-date version, you should download MemTool directly from the official Infineon Software Tools portal:

Official Tool Page: Infineon MemTool Software Portal — This is the primary location for the latest installer and documentation. infineon memtool download link

Alternative Support Site: Some legacy or specific device versions are shared via the Infineon Developer Community. Key Capabilities

Flash Management: Erase, program, and protect specific flash sections or entire memory areas.

Hardware Support: Comes with pre-configured files for Infineon evaluation boards using the onboard wiggler. It also supports the miniWiggler for custom hardware.

Batch Scripting: For production or automated testing, it supports command-line operations and batch file execution. Technical Troubleshooting Tips

If you encounter issues during installation or use, consider these common community-sourced solutions:

Installer Errors: If you see "Can't create Memtool user interface," users recommend fully uninstalling previous versions, clearing the %temp% directory, and restarting before installing the latest version (e.g., v6.0 or higher).

Connection Issues: Ensure your hardware (like the miniWiggler or FTDI cable) is correctly recognized by Windows. Sometimes a specific reprogramming procedure involving hardware shorts is required for certain boards to enter boot mode.

Sector Locking: If you cannot clear the flash, it may be due to enabled sector locking or unknown User Configuration Blocks (UCB) keys, which are common in pre-programmed or protected chips.

Quick Note: Avoid third-party "driver update" or "software informer" sites for this tool, as they may host outdated or modified versions. Always stick to the official Infineon portal.

Are you trying to connect to a specific microcontroller family, like the AURIX TC3xx or XMC1000? memtool - jlink batch file - Infineon Developer Community

The Infineon MemTool is a free-of-charge, Windows-based software utility primarily used for on-chip Flash programming and verification for Infineon microcontrollers. Download Links

You can access MemTool through several official Infineon channels: Infineon has recently unified access to development tools

Direct Download: The latest version and official release notes are typically available on the Infineon MemTool Product Page.

Developer Center: It is also accessible via the Infineon Developer Center (IDC), where you can manage installations through the IDC Launcher.

Tools Archive: Older or specific versions can sometimes be found in the Infineon Tools Archive. Key Features

MemTool provides essential functions for embedded development and evaluation: Infineon MemTool - Supports MCU Devices

Infineon MemTool is a free, Windows-based software utility designed for on-chip flash programming of Infineon microcontrollers. It is primarily intended for evaluation and development purposes, allowing engineers to erase, program, verify, and protect flash memory sections on a wide range of devices, including the AURIX (TC2xx/TC3xx) Infineon Developer Community Download and Installation Official Download

: The latest version and official documentation are available through the Infineon MemTool Product Page Infineon Developer Center Installation : To install, run the

found in the download package. If you have a single executable like , simply run that file. Note that administrator permissions are required for installation. System Requirements : The current version (v4.9.0) is officially supported on Microsoft Windows 10 (64-bit) Infineon Developer Community Features and Connectivity Device Support

: Supports almost the entire Infineon MCU range, including TriCore, AURIX, XMC1000/4000, and legacy families like XC800 and XC16x. Hardware Interface : It connects to target systems via USB to UART/DAS or using the Infineon miniWiggler for DAP and JTAG connections. Ready-to-Use Configs

: Includes pre-configured files for Infineon evaluation boards and application kits to simplify the initial setup. Infineon Developer Community Brief Operational Guide Select Target : Navigate to Target -> Change and browse for your specific microcontroller derivative. Configuration

menu to configure port selection and communication protocols (e.g., Minimon/UART). Flash Operations

: Once connected, you can load your hex/elf files to program the on-chip memory or perform mass erasures before a new code deployment. (like the miniWiggler) to MemTool? Infineon Flash Programmer Memtool for XMC1000 family

The Infineon Memtool is a free, PC/Windows-based utility designed for on-chip flash programming, specifically for erasing, programming, verifying, and protecting selectable flash sections. Official Download Information It supports communication via:

The software is primarily available through the official Infineon Software Tools portal. Platform: Windows 10 (64-bit) or newer.

Access Requirement: You may need to create a free Infineon account using a valid email address to access the download link on the official developer center.

Latest Version: Version 2025.04 is the current release as of early 2026. Key Features

On-Chip Flash Management: Handles erasing, programming, and verification for on-chip FLASH and OTP memory.

Ready-to-Use Configs: Includes pre-configured files for the full range of Infineon MCU evaluation boards and application kits.

Flexible Communication: Supports connections via DAS (Device Access Server), UART, DAP, and JTAG.

Batch Mode: Features a limited set of batch commands to automate connecting and programming devices. Supported Microcontroller Families

Memtool is compatible with a wide range of Infineon MCU derivatives, including: AURIX™: TC2xx, TC3xx, and preliminary support for TC49x. TriCore™: General support for the TriCore family. XMC™: XMC1000 and XMC4000 series.

Legacy Families: Supports XC800, XC16x, XC2000, and XE166 families. Hardware Requirements Host PC: Standard RS232 port or USB-to-target connections.

Interfaces: For custom boards, the Infineon miniWiggler is typically required for JTAG and DAP connections.

For detailed usage steps, you can refer to the official Memtool Tutorial PDF which covers everything from UI navigation to troubleshooting. Infineon Flash Programmer Memtool for XMC1000 Family