How To Hard Reset Myki Watch 4

Tap on Reset or Factory Reset. The watch will display a warning message: “Erase all data? This cannot be undone.”

Tap Confirm, OK, or the checkmark icon. Some models require you to scroll down to a confirmation button.

Scroll down through the settings options. You are looking for one of the following labels:

On most MYKI Watch 4 units, the path is: Settings > System > Reset.

If your MYKI Watch 4 is still under warranty and you are resetting it due to a malfunction (e.g., not syncing, battery drain, screen issues), perform the hard reset only after trying a simple restart (turn off/on). If problems persist after a hard reset, contact MYKI customer support – the device may have a hardware defect.

To hard reset a MyKi Watch 4 , you can use several methods depending on your access to the device: on-device dialer with a specific code, send a SMS command from a paired phone, or perform a soft restart via the power button Method 1: Using the Watch Dialer

This is the most direct way to reset the device if you have access to the watch's screen and its internal applications. Wake the screen : Press the Power button to turn on the display. Open the Dialer : Locate and open the Dial application on the watch. Enter the Reset Code : Type in the number Initiate Reset Call button . A confirmation popup will appear.

to begin the factory reset process. The watch will wipe all data and restart. Method 2: SMS Command (Remote Reset)

If you cannot use the watch screen directly, you can send a specific command from the phone paired with the watch. Requirements

: The watch must have a working SIM card with active reception and be paired with the MyKi Watch application or SeTracker 2. The Command

: Open your phone's messaging app and send one of the following lowercase text messages to the watch’s phone number: pw,123456,factory# pw,523681,factory# The Result

: If successful, you will receive a reply saying "factory ok, reset.." and the watch will restore itself to original settings. Method 3: Force Restart (Soft Reset)

If the watch is frozen or unresponsive but you do not want to delete your data, a force restart is often the first troubleshooting step. Manual Method : Press and hold the Power button

until the device turns off. Wait a few seconds, then hold the Power button again to turn it back on. SMS Method : Send the message pw,123456,reset# pw,523681,reset# to the watch's SIM number to force it to reboot remotely. Essential Setup Tips SIM Card Status

: For any remote reset or initial setup, ensure the SIM card has its PIN code disabled and has active 4G/data services Battery Level How to Hard Reset MYKI Watch 4

: Ensure the watch is sufficiently charged before starting a hard reset to prevent it from powering off mid-process. re-pairing the watch to your phone after the reset is complete? Hard Reset MYKI Watch 4 Lite

Ultimate Guide: How to Hard Reset Your MyKi Watch 4 If your MyKi Watch 4

is freezing, having connection issues, or you’re preparing to hand it off to a new owner, a hard reset is the best way to wipe the slate clean. This process restores the device to its original factory settings, erasing all personal data and unpairing it from the parent's phone.

Below are the most effective methods to perform a hard reset, ranging from simple dialer codes to SMS commands. Pre-Reset Checklist

Before you begin, ensure the following to avoid bricking your device:

Battery Level: Ensure the watch has at least 50% battery or is connected to its charger.

SIM Card: For most remote methods, the watch must have an active SIM card with cellular service.

Data Backup: Remember that a hard reset erases all settings, contacts, and historical data. Method 1: Using the Secret Dialer Code (Easiest) The quickest way to reset the MyKi Watch 4

is through the watch’s own interface using a hidden service code.

Wake the Screen: Press the Power button once to light up the display.

Open the Phone App: Navigate to and open the Dialer application on the watch menu. Enter the Code: Carefully dial *#174714# into the keypad. Initiate Call: Tap the green call button.

Confirm: A popup will appear asking if you want to proceed. Tap Yes to start the factory reset process.

Wait: The watch will reboot and return to the initial setup screen. Method 2: Remote SMS Command (Best for Lost/Frozen Watches)

If the watch screen is unresponsive or you don't have the device in hand, you can send a "forced" reset command via text message from your smartphone. Open Messaging: Open the SMS/Message app on your phone. Target Number: Tap on Reset or Factory Reset

Start a new conversation with the phone number assigned to the SIM card inside the MyKi watch .

Send the Command: Type and send one of the following commands exactly (they are case-sensitive): pw,123456,factory#

pw,523681,factory# (Try this if the first one doesn't work).

Receive Confirmation: If successful, the watch will reply with a text saying "factory ok, reset..." and will automatically reboot. Method 3: Troubleshooting a "Soft" Restart

If you don't want to lose your data but just need to fix a minor glitch, try a Soft Restart first.

Manual: Press and hold the Power/SOS button until the screen goes black, then wait a few seconds and hold it again to turn it back on.

SMS Command: You can also trigger a remote restart by texting pw,123456,reset# to the watch's number. What Happens After the Reset?

Once the process is complete, the watch will behave like it just came out of the box. You will need to:

Choose Language: Select your preferred language on the watch screen.

Re-pair: Open the MyKi Watch App or the SeTracker 2 App on your smartphone to scan the QR code and link the watch again.

For more specific hardware troubleshooting, you can visit the official MyKi Support Page for your model.

Was this guide helpful, or are you running into an error code while trying to reset? AI responses may include mistakes. Learn more Hard Reset MYKI Watch 4

Warning: Before performing a hard reset on your MYKI Watch 4, make sure to back up any important data, as this process will erase all data on the device. A hard reset will restore the device to its factory settings.

How to Hard Reset MYKI Watch 4:

To perform a hard reset on your MYKI Watch 4, follow these steps:

Your MYKI Watch 4 has now been hard reset. The device should restart and guide you through the initial setup process, allowing you to set it up as if it were new.

Post-Reset Steps:

Troubleshooting Tip: If you encounter any issues during the hard reset process, ensure that the device has sufficient battery charge. If problems persist, contact MYKI support or refer to the user manual for additional assistance.

If button combinations don’t work, the system may be completely locked up. Allow the battery to drain completely (this may take 24–48 hours). Then, charge the watch for 10 minutes and turn it on. It should now be reset.

If the watch is frozen, stuck on a logo, or not responding to touch, use this method.

Step 1: Place the watch on its charger and plug the charger into a USB power source (wall adapter or computer). A frozen watch sometimes needs power to reboot correctly.

Step 2: Locate the side button (the only physical button on the MYKI Watch 4, usually on the right side).

Step 3: Press and hold the side button for 20–30 seconds continuously. Do not release even if the screen changes.

Step 4: The screen will eventually turn off completely. Keep holding. After a few more seconds, the MYKI logo should appear.

Step 5: Once the logo appears, release the button. The watch will reboot in normal mode but will not erase your data (this is a soft reboot, not a hard reset).

Step 6: After the reboot, immediately follow Method 1 above to perform the actual factory reset while the watch is functional.

Note: If the watch remains frozen after holding the button for 30 seconds, try holding it while the watch is off the charger, then place it on the charger while still holding the button. This forces a deeper power cycle.