Hlf1081a Usb Lan Driver Windows 10 Salwisa Here

Are you staring at a "Device Unknown" message or a yellow exclamation mark in your Device Manager? If you’ve recently purchased a generic USB to LAN adapter and found that it doesn't work automatically on your Windows 10 computer, you are likely searching for the HLF1081A USB LAN Driver.

Finding the correct driver for generic computer hardware can be frustrating. Often, these devices come in unbranded packaging, or the mini-disc included with them is outdated or unusable on modern laptops.

In this guide, we will walk you through how to identify the device, find the correct Windows 10 driver, and get your wired internet connection up and running.

A: For 10/100 Mbps models, yes – but latency is higher than a PCIe Gigabit card. Fine for casual gaming, not for competitive esports.

Note: This often fails for the HLF1081A because Windows 10’s catalog may not include this specific vendor ID.

Last updated: May 2026 – Tested on Windows 10 Pro 22H2 and Windows 11 24H2.

If this guide helped you, share it with other Salwisa HLF1081A users. A working driver is just a few clicks away!

The HLF1081A (often associated with the QTS1081B model) is a generic USB 2.0 to Fast Ethernet adapter commonly used to provide a 10/100Mbps network connection to devices lacking a built-in Ethernet port. Driver Identification & Compatibility

While many modern versions of Windows 10 should recognize the device as Plug and Play, users often encounter a "USB device descriptor request failed" error (Code 43) or find it listed as an "Unknown Device". Hlf1081a Usb Lan Driver Windows 10 Salwisa

To resolve this, you must identify the internal chipset. The HLF1081A typically uses one of the following:

Core Chipset: Often identified as ID 0fe6:9700, which corresponds to the Kontron DM9601 or RD9700 Fast Ethernet adapter.

Alternative Chipsets: Some variants may use Realtek or ASIX (e.g., AX88178) chipsets. Installation Guide for Windows 10

If the adapter is not automatically detected, follow these steps to manually install the driver:

Locate the Device: Right-click the Start button and select Device Manager.

Find the Adapter: Look for a device with a yellow exclamation mark under Other Devices or Network Adapters. Update Driver: Right-click the device and select Update driver. Choose "Browse my computer for drivers".

Click "Let me pick from a list of available drivers on my computer".

Select Generic Driver: If you do not have the specific HLF1081A file, try selecting "Network adapters" then look for "Microsoft" or "Realtek" generic USB Ethernet options, or use a site like DriverScape to find a compatible RD9700 driver. Troubleshooting Common Issues Are you staring at a "Device Unknown" message

Connection Order: For some generic adapters to be recognized, you must plug the Ethernet cable into the adapter first, and then plug the adapter into the computer's USB port.

Hardware IDs: If you're unsure of the driver, go to the Details tab in Device Manager and select Hardware Ids. Search for the string (e.g., USB\VID_0FE6&PID_9700) on manufacturer sites like Realtek or ASIX to find the exact match. HLF1081A USB-OTG to LAN - Raspberry Pi Forums

HLF1081A USB LAN Adapter is a compact, cost-effective device used to add a 10/100 Mbps Ethernet port to computers lacking a built-in RJ45 jack. While often marketed under generic names or brands like , it primarily uses one of two common chipsets: the Corechip RD9700 Realtek RTL8152 1. Official Driver Identification

Windows 10 typically identifies and installs the necessary drivers automatically upon connection. If it fails to do so, identify your chipset to download the correct driver: Plugable Technologies Realtek Chipset (Most Likely):

Most modern HLF1081A units use Realtek. You can download the "Win10 Auto Installation Program" directly from the Realtek Download Center Corechip/RD9700 Chipset:

Some older or "ultra-cheap" models use the RD9700 chipset. Drivers for this are often hosted on repositories like DriverScape 2. Installation Guide for Windows 10

Follow these steps to manually install or update the driver: Plug in the adapter to an available USB port. Open Device Manager : Right-click the button and select Device Manager Locate the Device

: Look for an item labeled "USB 2.0 10/100M Ethernet Adaptor" or "Other Devices" with a yellow exclamation mark. Update Driver Right-click the device and select Update driver Search automatically for drivers If that fails, choose Browse my computer for drivers The HLF1081A should now appear under Network adapters

and point to the folder where you extracted the downloaded Realtek or RD9700 files. 3. Troubleshooting Common Issues Device Not Recognized

: Try a different USB port. Some ports may not provide enough power, especially on front-panel USB hubs. Driver Error (Code 10/43) : This is common with the RD9700 chipset on Windows 10. Device Manager Network Adapters Right-click the adapter > Properties Power Management Allow the computer to turn off this device to save power Slow Speeds

: Ensure the adapter is plugged into a USB 2.0 or 3.0 port directly, as some older USB 1.1 ports will throttle the speed significantly. Specifications Summary USB 2.0 (compatible with 3.0) 10/100 Mbps (Fast Ethernet) OS Support Windows 7/8/10/11, Linux, macOS Typically Realtek RTL8152 or RD9700 Are you seeing a specific error code

in Device Manager, such as "Code 10," or is the device simply not appearing at all?

| Hardware ID | Chipset | Recommended Driver Source | | --- | --- | --- | | VID_0BDA&PID_8152 | Realtek RTL8152B | Realtek official site (USB NIC Drivers) | | VID_0BDA&PID_8153 | Realtek RTL8153 | Realtek official site | | VID_0B95&PID_1790 | ASIX AX88179 | ASIX official site |

For the most common HLF1081A (Salwisa) with Realtek chipset:

Salwisa-specific note: If the adapter came with a mini-CD, do not use it – those discs contain outdated drivers for Windows 7. Always download fresh from the chipset maker.

For stubborn adapters: