After installation, the driver may not automatically attach.
For kernel developers, the exclusive driver allows reading the /dev/block/bootdevice partition via hidump commands over USB.
Get the exclusive HiSilicon Kirin 710 USB Driver today. Ensure seamless connectivity between your smartphone and computer. This standalone driver pack bypasses the need for bulky management software, offering a lightweight solution for developers and repair specialists to interface directly with the Kirin 710 hardware architecture.
To connect your HiSilicon Kirin 710 device to a PC for data transfer, firmware flashing, or advanced service operations like FRP bypass, you need specific Huawei USB drivers. The Kirin 710 chipset is widely used in mid-range devices like the Huawei P Smart 2019 and MatePad T8. Essential Driver Types
Depending on your task, you may need one or more of these drivers:
HUAWEI USB COM 1.0 Driver: This is the most critical "exclusive" driver for the Kirin 710. It is required for Testpoint operations, unbricking, or using service tools like Sigma Software. Common Version: 2.0.6.725. Hardware ID: USB\VID_12D1&PID_3650&MI_00.
ADB & Fastboot Drivers: Necessary for executing command-line instructions or unlocking bootloaders when the device is in Fastboot mode.
MTP/PTP Drivers: Standard drivers for basic file transfers, usually included in the HUAWEI PC Manager or HiSuite. Official Download & Installation
The safest way to ensure you have the correct, signed drivers for Windows 10/11 is through official Huawei software: hisilicon kirin 710 usb driver exclusive
HUAWEI PC Manager / HiSuite: Download the latest version from the HUAWEI Official Site. This package automatically installs all necessary communication drivers for Kirin-based devices.
Manual Installation: If the automated tools fail, you can find standalone driver packages like "Driver All Huawei Kirin.7z" on community repositories such as AndroidFileHost. Technical Tips for Kirin 710
Factory Mode: To trigger the Huawei USB COM 1.0 interface, you often need to use a hardware testpoint or a specialized cable.
Compatibility: These drivers are compatible with Windows 7, 8, 10, and 11 (both 32-bit and 64-bit).
Troubleshooting: If your PC shows an "Unknown Device" error, ensure your battery is above 30% and try a different USB port (preferably USB 2.0).
HUAWEI P Smart 2019 Загрузка драйверов, How To - HardReset.info
To install the HiSilicon Kirin 710 USB driver , you primarily need the HUAWEI USB COM 1.0 driver, which is essential for "Factory Mode" tasks like flashing firmware or unbricking devices. For standard file transfers or debugging, the HUAWEI ADB drivers included in HiSuite are used. 1. Identify Your Driver Need
HUAWEI USB COM 1.0: Required when the device is "dead," in EDL mode, or being used with service tools for unlocking and flashing. It often appears as "USB SER" in Device Manager before the driver is correctly applied. After installation, the driver may not automatically attach
ADB/Fastboot Drivers: Used for standard communication with a powered-on device or for simple bootloader commands. 2. Official Download Methods
The most reliable way to get drivers is through official Huawei software:
HUAWEI PC Manager: Automatically detects and updates official drivers for your connected hardware.
DriverTools: A standalone One-click Driver download tool provided by Huawei to download all necessary product drivers at once.
HiSuite: Installing the official HiSuite software typically bundles the standard USB and ADB drivers for all Kirin-based phones. 3. Manual Installation Guide (For USB COM 1.0)
If you are performing service tasks and your device shows up as "USB SER" in Device Manager, follow these manual steps: One-click Driver download tool for HUAWEI computers
The HiSilicon Kirin 710 USB driver is a fundamental piece of software required to establish a secure, high-speed connection between a PC and Huawei or Honor devices powered by the Kirin 710 chipset. This driver is essential for critical tasks such as firmware flashing, bypassing Factory Reset Protection (FRP), and high-speed data synchronization. Key Functions and Features
The Kirin 710 USB driver acts as a bridge, enabling the following "exclusive" capabilities for your device: The Kirin 710 chipset is widely used in
Firmware & Stock ROM Flashing: Essential for updating or restoring your device’s operating system using tools like Huawei Flash Tool.
Fastboot & ADB Modes: Allows developers and advanced users to execute commands via the terminal to unlock bootloaders or debug applications.
HUAWEI USB COM 1.0 Support: Vital for "unbricking" devices. This driver allows the PC to recognize the phone in a low-level "factory mode" even if the standard OS is corrupted.
Data Synchronization: Facilitates the transfer of photos, 1080p videos, and large documents between the device and a Windows PC. Technical Specifications Compatible OS Windows 7, 8, 8.1, 10, and 11 (32/64-bit) Chipset Support HiSilicon Kirin 710, 710F Interface USB 2.0 / 3.0 / 3.1 Primary Driver Tool
[HUAWEI PC Manager](https://consumer.huawei.com/uk/support/driver-list/ "Driver Download How to Install the Driver (Step-by-Step)
To ensure a successful connection, follow these steps to install the official drivers: DriverTools 1.2.0.5 | Driver detail-HUAWEI Official Site
1.2.0.5 * File name. DriverTools 1.2.0.5. Download. * File size. 10M. * Driver type. Other. * Operating system. Windows 11,win10. HUAWEI Global