Firmware version dwr-m960-v1.1.49 is a mature release likely focused on stability and security hardening for the M960 router platform. It is recommended for deployment in environments requiring reliable 4G backhaul. Users should ensure they are not using older versions (e.g., v
The D-Link DWR-M960 firmware version 1.1.49 (specifically for hardware revision Ax) was the subject of a security advisory issued on November 21, 2023, due to a reported vulnerability. Security Advisory Details Release Date: November 21, 2023.
Affected Device: DWR-M960 4G AC1200 LTE Router (Non-US models). Hardware Revision: Ax.
Issue: A third party reported a security concern affecting this specific firmware version. Official Fix and Recommendations
To address vulnerabilities found in version 1.1.49, D-Link generally recommends upgrading to the latest stable release. A later version, v1.1.51, has been noted by users as a functioning update for bricked or outdated units. How to Check and Update
Locate Version: Log in to the router web interface (typically at 192.168.0.1 or http://dlinkrouter.local) and check the top right corner of the dashboard. Manual Update: Download the latest firmware from the D-Link Support Page. Navigate to Management > Upgrade in the router settings. Select the downloaded file and click Upload.
Warning: Use a wired Ethernet connection for updates to avoid bricking the device.
Firmware version v1.1.49 for the D-Link DWR-M960 4G AC1200 LTE Router Go to product viewer dialog for this item.
is a critical update that primarily addresses severe security vulnerabilities. While it maintains the router's core functionality, it is more of a mandatory security patch than a feature upgrade. 🛡️ Security & Reliability
The standout feature of this version is its focus on safety.
Vulnerability Fixes: This version was released specifically to address high-risk security flaws reported by third parties.
Stable Connection: It continues to support secure WPA/WPA2 wireless encryption to protect network traffic from unauthorized access.
Dual Firewalls: Version 1.1.49 retains the SPI and NAT firewalls to block potential Internet attacks. 📶 Performance Specs
This firmware version supports the standard hardware capabilities of the
LTE Speeds: Provides downlink speeds up to 150 Mbps and uplink speeds up to 50 Mbps.
Dual-Band Wi-Fi: AC1200 technology allows for simultaneous 2.4GHz and 5GHz bands, suitable for streaming and basic web surfing.
Wired Connectivity: Fully supports the four Gigabit Ethernet ports for high-speed wired devices. ⚙️ Maintenance & Updates
Ease of Installation: The update can be applied through the standard web-based interface (typically 192.168.0.1).
Legacy Hardware: This version is specifically intended for Hardware Revision Ax. firmware version dwr-m960-v1.1.49
Successor: Note that a newer version, v1.1.51, has been seen in the wild, which may offer further stability for users experiencing "bricked" devices or boot loops. Final Verdict
If you are currently running an older version, upgrading to v1.1.49 is essential to protect your network from known exploits. However, if v1.1.51 is available for your specific hardware region, that may be a more stable choice for long-term use.
Are you currently experiencing connection drops or slow speeds?
The D-Link DWR-M960 is a highly popular 4G LTE AC1200 router, widely used for providing reliable internet in areas without fixed-line broadband. To keep this device running securely and efficiently, maintaining the correct firmware is essential.
The firmware version dwr-m960-v1.1.49 represents a specific software build released to improve the performance, stability, and security of this hardware.
Below is a complete guide to understanding, downloading, and installing this firmware version safely. What is Firmware Version dwr-m960-v1.1.49?
Firmware is the built-in software that controls how your router's hardware operates. Version v1.1.49 is a maintenance and security update designed specifically for the DWR-M960 router. Key Improvements in This Build
Security Patches: Fixes known vulnerabilities to prevent unauthorized network access.
ISP Compatibility: Improves connection stability with various global 4G SIM card providers.
Bug Fixes: Resolves sudden reboots and intermittent Wi-Fi drops.
Band Management: Optimizes automatic switching between 2.4 GHz and 5 GHz bands. Important Pre-Update Checklist
Updating router firmware carries a small risk of bricking (breaking) the device if done incorrectly. Before searching for the file, ensure you meet these conditions:
Check Hardware Version: Look at the sticker on the bottom of your router. D-Link firmware is strictly tied to specific hardware revisions (e.g., Hardware Version Ax, Bx, or Cx). Installing firmware meant for "Hardware A" onto "Hardware B" will break the router.
Use a Wired Connection: Never update router firmware over Wi-Fi. If the wireless signal drops for a split second during the transfer, the update will fail. Use an Ethernet cable to connect your computer directly to the router.
Ensure Stable Power: Do not attempt an update during a thunderstorm or when power outages are likely. How to Find and Download Firmware v1.1.49
D-Link does not use a single global website for all its downloads. Instead, they distribute files through regional support portals. Step 1: Identify Your Region
Because telecom standards vary by country, you must download the firmware from the specific D-Link support page for your continent or country (such as D-Link Middle East, D-Link India, or D-Link Europe). Step 2: Search the Official Portal Go to your local official D-Link Support website. Type DWR-M960 into the search bar.
Navigate to the Downloads or Support tab on the product page. Firmware version dwr-m960-v1
Look for the firmware section and locate file version v1.1.49.
Download the file (usually a .bin or .zip file) to your desktop. If it is a .zip file, extract it to get the raw .bin firmware file. Step-by-Step Installation Guide
Once you have downloaded the correct .bin file for your hardware revision, follow these steps to install it: 1. Access the Router Gateway Open a web browser on your connected computer.
Type the default IP address into the URL bar: 192.168.0.1 (check your router's bottom sticker if this does not work). Log in using your admin credentials. 2. Locate the Upgrade Section
Navigate to the Management, System, or Tools tab in the top/side menu. Click on Firmware Upgrade or System Update. 3. Upload the File Click the Browse or Choose File button.
Select the dwr-m960-v1.1.49 .bin file you downloaded earlier. Click the Upload or Upgrade button. 4. Wait for the Reboot
The router will show a progress bar. Do not refresh the page or unplug the router. The process takes about 3 to 5 minutes.
The router will automatically reboot once the installation is complete. Troubleshooting Post-Update Issues
If you experience issues after upgrading to version 1.1.49, follow these troubleshooting steps:
No Internet Connection: Double-check your APN settings. Sometimes firmware updates wipe custom APN profiles required by your SIM card provider.
Unstable Wi-Fi: Perform a factory reset. Find the small physical reset pinhole on the back of the router, press it with a paperclip for 10 seconds while the device is on, and set up your network again from scratch.
Cannot Log In: If the default password no longer works, the update may have restored the router to its factory default credentials. Check the bottom sticker for the default login info.
The DWR-M960 firmware version v1.1.49 is a critical security-related release for the D-Link 4G AC1200 LTE Router (Hardware Revision Ax). While it was intended to maintain device stability, it has been superseded by newer versions due to severe security vulnerabilities identified in the 1.1.x branch. ⚠️ Critical Security Alert
If you are currently running v1.1.49, your router is likely vulnerable to CVE-2025-13304, a stack-based buffer overflow.
The Risk: Remote attackers can exploit the "ping diagnostic" feature to execute code or crash your router.
Authentication: This attack does not require a password to succeed.
Recommendation: Immediately upgrade to a newer version (such as v1.1.51 or later) which contains patches for these flaws. 🛠️ Update and Maintenance Guide
To secure your device, follow these steps to move beyond version 1.1.49. 1. Identify Your Hardware Device Information: The D-Link DWR-M960 4G LTE Router
Hardware Revision: Check the sticker on the bottom of the router. This firmware is specifically for Revision Ax.
Current Version: Log in to http://192.168.0.1 and look at the top-right corner of the web interface to confirm your current version. 2. Perform the Upgrade
Use a Wired Connection: Always perform firmware updates via an Ethernet cable, never over Wi-Fi, to prevent "bricking" (rendering the router unusable). Manual Upload:
Download the latest .bin file from the D-Link Support Portal. Navigate to Maintenance > Firmware Update. Select the file and click Upload. 3. Troubleshooting
Admin Page Issues: Users have reported that the admin login page may fail to load after some updates; if this happens, a factory reset (holding the reset button for 10 seconds) is often required.
Country Locks: Some versions of this firmware may lock the region settings (e.g., to UAE). Installing the most recent global firmware typically resolves these regional restrictions. 💡 Advanced Options: OpenWrt
For users seeking more control or security than the stock D-Link firmware provides, the Go to product viewer dialog for this item. can sometimes be flashed with OpenWrt.
Benefits: Frequent security updates, advanced firewall rules, and removal of vendor-specific bugs.
Installation: Requires using the JBOOT bootloader or the OEM GUI to upload a "factory.bin" image. Note: This may void your warranty. (Non-US) DWR-M960 : H/W Rev. Ax :: F/W v1.1.49 - D-Link
Key Features and Updates:
Device Information:
The D-Link DWR-M960 4G LTE Router is a wireless router designed for mobile and remote applications. It supports 4G LTE connectivity, providing high-speed internet access for multiple devices.
Checking and Updating Firmware:
To check and update the firmware on your D-Link DWR-M960 router:
Best Practices:
For specific details about the DWR-M960-V1.1.49 firmware version, such as release notes or changelogs, please consult the D-Link support website or contact their customer support team.
Some users report that IPv6 stops forwarding to LAN clients after 24 hours. Workaround: Under Advanced → IPv6, set the mode to “Link-Local Only” or disable IPv6 entirely if your ISP doesn’t use it.
The semantic versioning 1.1.49 suggests the following development stage: