Skip to main content

Eliwell Sb655 C Manual Repack May 2026

| Parameter | Old Value (Cooler) | New Value (Freezer) | Navigation notes from repack | | :--- | :--- | :--- | :--- | | LS (Minimum SP) | -5°C | -30°C | Found after parameter US | | SP (Setpoint) | 3°C | -18°C | Directly accessible via SET key | | dIt (Defrost interval) | 8 hours | 4 hours | Parameter group dF | | dL (Max defrost duration) | 20 min | 35 min | For heavy ice buildup | | FSt (Fan stop temp) | 4°C | -5°C | Prevents icing of evaporator |

  • Save settings and exit. Verify correct operation by forcing outputs in manual mode if available.

    • The Eliwell SB655 C Manual Repack is not an official document from Eliwell (now part of Schneider Electric), but rather a user-created compilation. For technicians and maintenance staff, it’s often more useful than the original—provided you understand its limitations.

    Here is the translation for the errors that the manual explains poorly.

    1. The display shows "---" (or -/-/-)

    2. The unit shows "EE"

    3. "LP" Alarm (Low Pressure)

    4. Stuck in "Standby" (Off)

    When managing commercial refrigeration or HVAC systems, few components are as critical yet as overlooked as the controller documentation. For technicians and facility managers working with the Eliwell SB655 C, finding a clean, complete, and usable manual can be a daily struggle. The original PDFs are often fragmented, poorly scanned, or missing crucial programming flowcharts.

    Enter the Eliwell SB655 C Manual Repack—a curated, fully indexed, and printer-friendly version of the official technical documentation. This guide provides a deep dive into what this repack contains, how to use it to unlock the full potential of your controller, and step-by-step troubleshooting advice.

    Disclaimer: This article is for informational purposes. Always refer to the official Eliwell (Schneider Electric) documentation for safety instructions and wiring codes.

    For full technical specifications, wiring diagrams, and advanced programming instructions, consult the official SB655‑C technical manual provided by the manufacturer.

    Related search suggestions: Eliwell SB655-C manual, SB655 wiring diagram, Eliwell thermostat probe NTC values.

    Eliwell SB655 C Manual Repack: A Step-by-Step Guide

    The Eliwell SB655 C is a popular temperature control device used in various industrial and commercial applications. However, due to its complex configuration and setup process, many users often find themselves struggling to properly set up and calibrate the device. In this blog post, we will focus on the Eliwell SB655 C manual re-pack, providing a detailed, step-by-step guide on how to re-pack and configure the device. eliwell sb655 c manual repack

    What is Eliwell SB655 C?

    The Eliwell SB655 C is a digital temperature controller designed to control and monitor temperature in various applications, including refrigeration, air conditioning, and heating systems. It features a user-friendly interface, allowing users to easily set and adjust temperature parameters. The device comes with a range of features, including:

    Why Repack Eliwell SB655 C?

    There are several reasons why you might need to re-pack the Eliwell SB655 C:

    Step-by-Step Guide to Eliwell SB655 C Manual Repack

    The following is a step-by-step guide to manually re-packing the Eliwell SB655 C:

    Additional Tips and Considerations

    By following this step-by-step guide, you should be able to successfully perform a manual re-pack of the Eliwell SB655 C and get your device up and running with the desired configuration.

    The Eliwell SB655 C is a parametric controller typically used in centralized air-conditioning and HVAC units. While "manual repack" is not a standard term in Eliwell's technical documentation, it likely refers to a manual reconfiguration or restoration of the parameter map using a physical support key. Key Deep Feature: Parameter Mapping & Restoration

    The most critical feature for managing a "repack" (restoring or updating the controller's configuration) is the use of the Multi-Function Key (mFK) or Copy Card. This allows technicians to bypass manual manual entry of dozens of parameters.

    Firmware & Parameter Updates: The mFK acts as a memory support to update device firmware or reload pre-programmed parameter values.

    Safety Lockouts (Manual Recovery): If the controller displays "OFF" and is unresponsive to standard button presses, a deep recovery feature involves accessing the Ui23 parameter. By entering password "2" and changing Ui23 from 0 to 1, you can re-enable the manual power-on function from the keypad.

    Automatic Configuration: When downloading a map from a pre-programmed key, the instrument automatically adopts the new parameter set and restarts, ensuring a clean "repack" of settings without needing to format the key. | Parameter | Old Value (Cooler) | New

    Defrost & Mode Management: The manual defrost and mode functions can be explicitly enabled or disabled via parameters Ui21 (Mode selection) and AIE (Manual defrost) to prevent unauthorized manual overrides. Technical Specifications for Repacking

    If you are manually re-cabling or "repacking" the hardware installation, the SB655/C/S Data Sheet highlights several crucial hardware points:

    Output Capacity: 5 relays, 2 PWM outputs, and 2 x 0-10V analog outputs.

    Communication: Support for TTL, Miconet, and Modbus protocols (/S models include RS485 for network integration).

    Voltage Safety: High-voltage relay loads must not exceed capacity; use external contactors for high-power demands.

    Electronic controllers for centralised air-conditioning units

    The Eliwell SB655/C is a specialized energy-flex parametric controller designed for centralized air-conditioning units, chillers, and heat pumps. While there is no official "repack" version from Eliwell, users often use this term for consolidating manual instructions or firmware updates onto a single key/card for field service. Core Functionality manages complex HVAC operations, including:

    Circuit Management: Controls up to 2 refrigerant circuits with a maximum of 4 compressors or 4 power stages.

    Compressor Types: Compatible with Scroll, Semi-Hermetic, and Screw compressors.

    Adaptive Cooling: Includes an adaptive function for battery-free cooling and intelligent capacity management to meet specific demand requirements.

    Power Control: Features limitation of power and support for variable frequency drives (VFD) for both primary water pumps and compressors. Quick Setup & Programming Guide

    For routine service or "repacking" configurations across multiple units, follow these interface basics: CT123040 Flex TDS EN 9-10.qxd

    Eliwell SB655/C is a universal controller from the Energy Flex Save settings and exit

    range designed for centralized air-conditioning units and chillers with up to two refrigerant circuits. This model is particularly robust for managing compressors (scroll, semi-hermetic, or screw) and features intelligent capacity management to balance operating hours across multiple power output steps. Electric Automation Network Core Technical Specifications Power Supply : 12–24V AC or 24V DC. Input/Output Configuration

    : Includes 6 digital inputs, up to 5 relay outputs, and multiple analogue outputs (0...10V, 4...20mA, or PWM). Sensor Support

    : Configurable for NTC, PTC, or various current/voltage signals. Connectivity : Equipped with a TTL serial port for Multi-Function Key (MFK)

    connections and RS-485 for Modbus or Televis supervision systems. Frigo Soğutma Key Operational Features Compressor Management

    : Controls up to 4 power stages per circuit or single circuits with 4 compressors, featuring automatic rotation to ensure even wear. Thermoregulation

    : Supports control based on inlet or outlet water temperature, making it ideal for heat pump and chiller applications. Display & Interface

    : A 4-digit display with 18 icons (7 configurable) provides clear status and alarm monitoring. Advanced Functions

    : Includes dynamic set point management, automatic summer-winter changeover, and "Free Cooling/Heating" logic. Electric Automation Network Maintenance & Troubleshooting Alarm History

    : The controller stores an alarm history for rapid diagnosis of past issues. Common Alarm Codes : Low or high temperature alarm on probe 1. : External alarm triggered by a digital input. : Open door alarm. Programming

    : Parameters are organized into folders with three access levels (End User, Service, and Constructor). Configuration can be simplified using a to download/upload parameter maps. Electric Automation Network Relevant Documentation & Resources

    For detailed wiring diagrams and full parameter tables, you can refer to the official Energy Flex Data Sheet or the comprehensive Energy Flex User Manual terminal wiring diagram for a particular circuit configuration?

    Electronic controllers for centralised air-conditioning units 28 Mar 2007 —