Digipos Ds-900 Printer Driver May 2026

DigiPos DS-900 driver download Windows 10 64-bit POS receipt printer

  • Uninstall the old driver via Control Panel > Programs and Features.
  • Reboot.
  • Install the new driver.

    • Q: Is the DigiPos DS-900 driver compatible with Linux (Ubuntu/Raspberry Pi)? A: There is no official Linux driver. However, the DS-900 works using generic CUPS (Common UNIX Printing System) with the "ESC/POS Raw" driver. You will lose cash drawer control unless you send raw hex commands.

    Q: Can I use the DS-900 driver on a 64-bit system if the installer only shows 32-bit? A: Yes. The DigiPos DS-900 driver is a hybrid driver. The 32-bit installer works on x64 systems, but you must bypass driver signature enforcement (see Issue #1 above). digipos ds-900 printer driver

    Q: Why does my DS-900 print blank receipts? A: You are using thermal paper on the wrong side. Flip the paper roll over. The heat-sensitive side must face the thermal print head (usually upward).

    Q: Do I need a separate driver for the DS-900 if I use a USB-to-Serial converter? A: Yes. The converter requires its own driver (e.g., Prolific or FTDI). The DigiPos driver then communicates through the virtual COM port created by the converter. DigiPos DS-900 driver download Windows 10 64-bit POS

    Symptom: The cutter activates before the print job finishes.

    Solution: The driver is receiving a "Cut" command prematurely, often due to incorrect page-length settings. Uninstall the old driver via Control Panel >

    Fix: