Cisco 851710 — Install

config network webmode enable

Access via https://<management_IP> (default credentials set during wizard).

The 851710 module requires a Cisco 6500-E series chassis or a Cisco 7600 series with a high-speed backplane. It will not work in legacy 6500 non-E chassis (e.g., 6506, 6509 original). cisco 851710 install

Rating for install: ⭐⭐⭐⭐☆ (4/5) – easy, but no rack option. config network webmode enable

If the phone does not auto-register, you may need to manually assign the TFTP server: The 851710 module requires a Cisco 6500-E series

  • Navigate to Network Configuration.
  • Scroll to TFTP Server 1.
  • Press Edit and enter the IP address of your Cisco Call Manager.
  • Press Save. The phone will reboot and attempt to register.

    • From ROMMON or from a working supervisor, copy the image:

    Switch# copy tftp flash:cat6500-s720k91-mz.122-33.SXI15.bin
Switch# boot system flash:cat6500-s720k91-mz.122-33.SXI15.bin
Switch# config-register 0x2102
Switch# write memory
Switch# reload

    Switch# show diagnostics online module 5
Switch# show environment temperatures
Switch# show fabric utilization module 5

    If you need the exact steps for a different Cisco model (e.g., 8510 router blade, 8510 switch module, or a typo for 85710), provide the full part number (e.g., C8510-ISR, AIR-CT8510-HA-K9, etc.) and I’ll tailor the guide accordingly.