How long does the EW-32 remember settings? With a fully charged internal battery (charged after ~12 hours plugged in), the unit will retain your programs and keep the clock running for 6 months without AC power.
The Chevron Digital Timer EW-32 is a workhorse device that, despite its simple appearance, offers industrial-grade scheduling power. Whether you are automating a hydroponic light cycle, a pool pump, or security lighting, mastering the SET/CLK, PROG, and ON/AUTO/OFF buttons is the key to success.
If you have followed this manual and your device still does not respond, the internal relay or crystal oscillator may have failed. Given the low cost of the EW-32, replacement is often more economical than repair. chevron digital timer ew-32 user manual
Save this article—bookmark it on your phone. Next time a power outage scrambles your schedule, you’ll have the complete Chevron EW-32 manual ready in 30 seconds.
Disclaimer: This guide is for informational purposes. Always consult a licensed electrician for permanent installation. The Chevron brand and EW-32 model are trademarks of their respective owners. Ventilation: Ensure the ventilation slots are not blocked
The timer has a Master Switch located on the side or front of the unit.
Note: To run your programs, the switch must be set to AUTO. How long does the EW-32 remember settings
| Problem | Likely Solution | |---------|------------------| | Display blank | Press RST or check outlet power. | | Timer not switching | Ensure mode is AUTO, not ON/OFF. | | Time wrong after power cut | Internal battery dead – reset clock. | | Device turns off too early | Check program OFF time (AM/PM). | | Programs lost | Press RST and re-enter all programs. |
To follow this manual, locate these 6 buttons on the front panel below the LCD screen:
| Button Symbol | Name | Primary Function | | :--- | :--- | :--- | | SET/CLK | Set / Clock | Enter settings, confirm values, return to clock. | | ON/AUTO/OFF | Mode Toggle | Switch between Timer ON, Timer OFF, and AUTO mode. | | + (Plus) | Increase Value | Increase hours/minutes/current time. | | - (Minus) | Decrease Value | Decrease hours/minutes/current time. | | PROG (P) | Program | Enter program memory slots (1-8). | | RST | Reset | (Recessed pinhole) Resets timer to factory settings. |
LCD Screen Indicators:
कुमार सानू
कविता कृष्णामूर्ति
अभिजीत भट्टाचार्य
हेमा सरदेसाई
अदनान सामी