Ch-899 Chouchin Radio Controlled Clock | Instructions

If you live in a rural area or a concrete basement with zero reception, you can use the CH-899 as a standard quartz clock.

| Problem | Solution | |---------|----------| | Clock never syncs | Move to a different room, away from Wi-Fi routers & power strips. Try overnight (signal is strongest). | | Time is off by 1 hour | Check DST (Daylight Saving Time) setting – set to AUTO or ON/OFF as needed. Also verify time zone. | | Second hand stuck at 12 | Normal searching mode. Wait up to 12 minutes. If still stuck, remove batteries for 30 seconds and retry. | | LCD is dim or blank | Replace batteries. Cold temperatures can temporarily dim the display. | | Fast/slow ticking | Analog models: Rapid ticking means it's catching up to correct time. It will stop when exact time is reached. | ch-899 chouchin radio controlled clock instructions

Upon first power-up, the clock will automatically search for the radio signal. If you live in a rural area or

To get the best performance from your Chouchin CH-899 radio controlled clock: DCF77 in Europe

| Step | Action | |------|--------| | 1 | Insert fresh alkaline batteries | | 2 | Set correct time zone (PST/CST/EST/MST) | | 3 | Place near a window, away from interference | | 4 | Wait up to 24 hours for first sync | | 5 | If no sync after 24h, use manual set or move the clock | | 6 | Adjust DST switch to AUTO | | 7 | Press RESET if clock behaves oddly |

The CH-899 combines traditional analog or digital timekeeping with modern radio-controlled (RC) technology. It automatically synchronizes with a government radio time signal (like WWVB in the US, DCF77 in Europe, or MSF in the UK) to ensure perfect accuracy.

Once the clock is at 12:00, the clock should automatically begin searching for the signal.