The circuit is deceptively simple. It consists of five distinct stages:
For power users, here are three exclusive modifications that transform the basic Blue Ring Tester into a professional-grade tool.
Below is the complete schematic diagram of the classic Blue Ring Tester. This design uses a 555 timer, a comparator (LM393), and a handful of passive components to generate a short ringing pulse and analyze the decay. blue ring tester schematic diagram exclusive
(Description of Schematic – for visual reference in text-based medium)
The schematic is organized into three distinct sections: The circuit is deceptively simple
Component List (Exclusive Verified Values):
| Reference | Value | Notes | |-----------|-------|-------| | U1 | NE555 | Timer IC | | U2 | LM393 | Dual comparator (one used) | | D1, D2 | 1N4148 | Fast switching diodes | | D3 | Red LED | Fault indicator | | D4 | Green LED | Pass indicator | | C1 | 100nF | Ceramic disc | | C2 | 10nF | Polyester | | C3 | 100µF / 16V | Electrolytic | | C4 | 10pF | Ceramic (critical) | | R1 | 10kΩ | 1/4W | | R2 | 1kΩ | 1/4W | | R3 | 100Ω | 1/4W | | R4 | 1MΩ | 1/4W | | R5 | 47kΩ | 1/4W | | R6 | 10kΩ | 1/4W | | R7 | 330Ω | 1/4W | | R8 | 220Ω | 1/4W | | RV1 | 10kΩ trimpot | Calibration | | Lx | Coil under test | External connection | | Power | 9V battery (or 9-12V DC) | Regulated recommended | Component List (Exclusive Verified Values): | Reference |
Exclusive Note: Many online copies of this schematic incorrectly label C4 as 100pF. Our analysis shows that 10pF is correct for the 100kHz-500kHz range. Using 100pF dampens the ring too quickly.