This report details the installation requirements and procedure for the configuration software required to parameterize Servostar servo drives (including the 4720 series variants). The primary software utilized is Kollmorgen Servostar Parameters, often bundled with the Kollmorgen Motioneering suite. This tool allows for the uploading, downloading, and editing of drive parameters (position, velocity, current loops, and I/O configuration).
The installation of the Servostar parameter tool is a straightforward process provided the correct cabling and administrative permissions are in place. For the 4720 series drive, utilizing the latest Motioneering suite ensures the highest compatibility with modern Windows operating systems while maintaining the ability to configure legacy parameters.
Status: Installation guide complete. Ready for deployment.
4720 Parameter Tool (often referred to as the Service Tool Maintenance Tool
) is a specialized utility primarily used for configuring and resetting digital printers, most notably those using Epson 4720/I3200 printheads or specific
inkjet models. Below is an essay exploring its technical significance, installation process, and operational impact.
The Critical Role of the 4720 Parameter Tool in Digital Printing
In the world of high-precision digital printing, hardware alone does not determine output quality. The synchronization between mechanical components and software instructions is governed by a "Parameter Tool." For machines utilizing the Epson 4720 printhead—a powerhouse in DTF (Direct to Film) and sublimation printing—the parameter tool acts as the digital brain. It allows technicians to fine-tune the voltages, firing frequencies, and nozzle alignments that are essential for maintaining industrial-grade production speeds. Understanding the Tool's Functionality
The 4720 tool is not a standard consumer driver; it is a maintenance-level utility. Its primary functions include: Printhead Calibration:
Adjusting the "nozzle step" and alignment between multiple heads to ensure sharp images without banding. Voltage Management:
Modifying the electrical pulses sent to the Epson 4720's 3,200 nozzles to optimize ink droplet size. Maintenance Resets:
For certain printer lineages (like those sharing service protocols with Canon), the tool is used to reset "waste ink counters" or "maintenance tank" alerts that otherwise lock the machine after a certain volume of use. Installation and Setup Protocol
Installing the 4720 parameter tool requires a specific sequence to ensure the hardware and software "handshake" correctly. System Preparation:
Most tools require a Windows-based environment with specific network or USB configurations. For board-level tools, ensuring the PC is on the same local subnet as the printer’s carriage board is vital. Software Deployment:
The tool is typically distributed as a standalone executable (e.g., PrintExp.exe ServiceTool.exe 4720 parameter tool install
). Unlike standard apps, it often does not require a traditional "Installation Wizard" but must be run from a folder containing its specific library files. Establishing Communication:
Once launched, the user must select the correct port—often a Gigabit NIC
for high-speed industrial printers—to allow the software to read the current parameters from the printer's EEPROM. Parameter Injection:
Technicians load a "parameter file" (often with a .dat or .bin extension) provided by the manufacturer. This file contains the factory-calibrated settings specific to that individual printhead's performance curve. The Impact of Proper Installation
An incorrectly installed or configured parameter tool can lead to catastrophic hardware failure. For instance, applying the wrong voltage parameters to a 4720 head can overheat the piezo elements, permanently "firing" nozzles and ruining a component that costs hundreds of dollars. Conversely, a properly installed tool empowers a shop to achieve "plug-and-play" efficiency, allowing for the quick swapping of heads and immediate resumption of 200+ sqm/h printing speeds. Conclusion
To ensure I provide the most helpful article, could you please clarify which you are referring to?
The term "4720" appears in a few different technical contexts: Windows Security Events : Specifically, Event ID 4720 , which is triggered when a user account is created
. Are you looking for a guide on how to configure or install auditing tools for this event? Networking Hardware Netgear WNDR4720
router, which often involves installing custom firmware like Database Management : An error or parameter related to MongoDB upgrades Exchange Server mailbox configurations.
The 4720 Parameter Tool (often referred to as the "Printhead Parameter Tool") is a critical utility used for configuring and aligning the Epson 4720 printhead in commercial Direct-to-Film (DTF) and Large Format Printers. This tool allows engineers and users to write specific voltage and firing data to the printer's mainboard to ensure the printhead operates correctly after replacement. Installation & Setup Guide 1. Preparation
Driver Compatibility: Ensure you have the correct USB drivers installed for your specific printer model. Many 4720 printers require a USB Virtual COM port driver to communicate with the parameter tool.
Physical Connection: Connect your computer to the printer via a high-quality USB cable. Ensure the printer is powered on and in a "Ready" or "Service" state. 2. Tool Installation
Download: Obtain the software package (typically a .zip or .rar file) from your printer manufacturer or head board supplier.
Extraction: Extract the files to a dedicated folder on your local drive. Avoid running the tool directly from a compressed folder. The installation of the Servostar parameter tool is
Run as Administrator: Right-click the .exe file (often named ParameterTool.exe or similar) and select Run as Administrator to ensure it has the necessary permissions to access system ports. 3. Writing Parameters
Load Head Data: In the tool's interface, look for a "Load" or "Read" option. You will typically need to input the Head ID (found on a label on the physical printhead) or load a configuration file provided with the new head.
Port Selection: Select the correct COM port identified in your computer’s Device Manager.
Write/Update: Click the "Write" or "Update" button. A progress bar should appear, followed by a "Success" message once the mainboard is updated. Best Practices for 4720 Printers
Calibration: After installing the parameters, you must perform Horizontal and Vertical calibrations through the printer's control software to ensure precise alignment.
Firmware Match: Ensure the parameter tool version matches your printer's firmware to avoid communication errors or mainboard damage.
Verification: Run a Nozzle Check or "Test Print" immediately after writing parameters to verify the head is firing with the correct voltage settings. Parameter Setup Tool
* 3.1.1. Installation of USB driver ..................................................................................... ... * 3. 株式会社シマデン Setup for the WF-4720 Series - Epson Support
4720 Parameter Tool (often associated with biometric and access control devices) is a specialized utility used to configure device parameters such as IP addresses, port numbers, and communication keys.
Below is a guide on how to install and use this tool to manage your devices. Overview of the 4720 Parameter Tool
This tool allows administrators to control and configure ZKTeco devices via IP. It is particularly useful for setting up communication between hardware (like fingerprint readers or face recognition terminals) and management software. Installation Steps Download the Tool : Obtain the software package from the ZKTeco Download Center or your authorized provider. Extract the Files
: Unzip the downloaded folder. You will typically find a subfolder named SDK-Ver6.x.x.x\32bit or similar. Install Required DLLs Navigate to the Find the file named Register_SDK_x86.bat Right-click and select Run as administrator . This registers the necessary libraries on your system. Launch the Software : Locate the main executable (e.g., or the parameter tool icon) and Run as administrator
to ensure it has the permissions needed to modify network settings. Configuring Device Parameters
Once installed, you can use the tool to link your PC to the device: Default Connection : Most devices use by default. Identify the IP : Enter the device's current IP address (often 192.168.1.201 for new units) to establish a connection. Write Parameters Ready for deployment
: After connecting, you can "Read" current settings, make changes (like assigning a static IP), and then "Write" those settings back to the device's memory. Tips for a Successful Setup Firewall Permissions
: Ensure your Windows Firewall or antivirus software isn't blocking the tool, as it needs to communicate over specific network ports. Admin Rights
: Always run the installation and the tool as an Administrator to avoid "Access Denied" errors during SDK registration. SDK Compatibility
: Ensure you are using the correct version of the tool (32-bit vs. 64-bit) that matches your operating system and the specific device model. for ZKTeco devices or help troubleshooting a connection
The 4720 Parameter Tool is a specialised utility used for configuring and maintaining Epson 4720 and I3200 printheads, commonly found in DTF (Direct to Film), UV, and sublimation printers. It bridges the gap between the printer hardware and the control software (like MainTop or RIPrint). Key Features
Printhead Alignment: Provides precision controls for adjusting the vertical and horizontal alignment of the printhead to eliminate banding and ensure sharp image quality.
Voltage Control: Allows you to adjust the firing voltage of the nozzles. This is critical for controlling ink drop size and ensuring consistency across different ink brands or viscosities.
Nozzle Checking & Cleaning: Includes built-in utilities to trigger specific nozzle patterns for health checks and "pumping" commands for automated head cleaning.
Parameter Backup/Restore: Lets you save the current configuration of a working printer and "flash" those settings onto a new motherboard or printhead during a replacement.
Bidirectional Calibration: Adjusts the timing of ink ejection when the carriage moves in both directions, ensuring dots land in the exact same spot regardless of carriage travel. Installation Process
Installing the tool typically requires a direct connection to the printer's mainboard via USB or Network (Ethernet).
Driver Setup: You must first install the specific USB or Network driver provided by your printer manufacturer (e.g., Hoson, Wellprint, or BYHX). IP Configuration : If using a network-based board (common for Go to product viewer dialog for this item. Go to product viewer dialog for this item.
), you must set your PC’s static IP to the same subnet as the printer (usually 192.168.1.xxx).
Software Execution: The tool is often "portable," meaning it does not require a standard Windows installation. You simply unzip the folder and run the .exe file as an Administrator.
Board Connection: Once opened, you click "Connect" or "Read" to pull the current parameters from the printer's board.
After the main software installs, Windows may prompt: “Would you like to install this device software?” for a 4720 USB Serial Converter. Click Install—this is the proprietary virtual COM port driver essential for communication.